Traxxas Rod Ends Long & Short

This set of rod ends, balls, and screws is used on all however four of Traxxas'
kits. It WILL NOT WORK ON: the Sledgehammer, initial Hawk, Cat, or Bullet.

Includes: 4 brief rod ends (17mm)
16 long rod ends (19mm)
2 ball screws
18 hollow ball adapters

pcd 01/23/94

Right here is a wonderful product that several others have actually bought at the exact same time.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
location over the shock body and the piston heads that manage the amount
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on most Traxxas nitro and electrical powered vehicles.
Two hole piston moving towards higher dampening or two hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and 2 lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to install parts.

You will like this product if you have the product earlier discussed.

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building and construction

INCLUDES:
Eiqht 4mm flanged nylon locking nuts

SPECIFICATIONS:
Outside diameter: 7mm

This product is regularly purchased with the above stated product.

Suspension Pins 44Mm Slash Rustler / Stampede / Bandit

This is a set of chrome suspension pins used to hold the front suspension arms
on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER.

Includes: 2 chrome suspension pins and two "E" type retaining clips.

Requires:nothing parts are a direct replacement.

Specs:3mm x 44mm pins are notched for the 3MM "E" type retaining clips at each
end. WLG 9-29-97

Frequently purchased with the product that you are presently reviewing.

40Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil used with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in hot weather or thicken up in cold weather

INCLUDES:
One bottle of silicone oil

SPECIFICATIONS:
40wt (the greater the weight number the thicker the oil)
2 oz. bottle

This is a great addition to the product presently being talked about.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two Front bearing (center) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

Frequently purchased with the product that you are presently reviewing.

Large Servo Saver

This is a big servo saver that can be used in Traxxas automobiles or any car that
needs a big style servo saver.
FEATURES:
Tough white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that allow you to mount the saver
on most popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise included is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for installing the guiding linkages.