Traxxas Pivot Balls Alum Hard Anod 4Pc

These are the Optional Pivot Balls for the Traxxas T-Maxx
4WD Radio Control Monster Truck.
These pivot balls are installed through the upper and lower suspension
arms and axle carriers and allow camber change of the wheels.

FEATURES:
Change stock pivot balls with these hardened strong versions.
Constructed of 7075 T-6 aluminum.

INCLUDES:
Four tough anodized 7075 T-6 aluminum pivot balls.
Four ball cap bushings.

REQUIRES:
Installing through the suspension arms (4931) and axle carriers
    (4932).

This item praises the above talked about item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This item praises the above talked about item.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Building and construction
Blue Rubber Sealed

CONSISTS OF:
Two 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

NEEDS:
Assembly onto Automobile

SPECS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Thickness: 4mm (0.15")

REMARKS:
These are for the Within the Wheel Centers, the Truck Needs
Four Overall of these Bearings.

Right here is a great item that lots of others have bought at the same time.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for usage on the E-Revo

FEATURES:
Stainless Steel bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 6x13x5mm ball bearings Part #5180

SPECS:
Inside size: 6mm (0.24")
Outside size: 13mm (0.51")
Width: 5mm (0.20")

Right here is a great item that lots of others have bought at the same time.



This is the replacement Steering Block L&R for
usage with the Associated RC10GT2.

FEATURES:
Nylon Building and construction
Black in Color

CONSISTS OF:
One Left Steering Block
One Right Steering Block

NEEDS:
Installation

This item is often purchased with the above mentioned item.



This is the replacement 30 Degree Caster Block for the Group Associated
RC10GT2 Factory Team.
This will also work as a replacement for the 25 Degree Blocks - ASCC7919
that included the RC10GT2 RTR

FEATURES:
Composite nylon construction, black in color
Replaces worn or damaged caster obstructs

CONSISTS OF:
Two 30 degree caster obstructs

NEEDS:
Installation following the model handbook