Traxxas Oilite Bushings 5X11mm

This is a replacement bushing set for the TRAXXAS TRX-10 BULLET, HAWK2, and
different other TRAXXAS PACKAGES. .
FUNCTIONS:
Made of metal

CONSISTS OF:
14 bushings

SPECIFICATIONS:
5x11mm bushings

REMARKS:
These bushings would deal with any car using 5x11mm bushings.

Right here is a great item that numerous others have actually bought at the exact same time.

Hex Wheel Hub 2.5 X 12Mm Rustler / Stampede / Slash

This is a Hex Wheel Center Set for the Traxxas Rustler and
Stampede. These parts have actually more offset than
the stock hex wheel hub set (TRAC6044).

FUNCTIONS:
Gray plastic building and construction

CONSISTS OF:
Two wheel centers
Two 2.5mmX12mm axle pins

SPECIFICATIONS:
Hex size: 12mm
Width: .32" (8mm)

The listed below item likewise pairs actually well with the item being gone over.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building and construction
Black in color

CONSISTS OF:
One left and ideal steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

Right here is a great item that numerous others have actually bought at the exact same time.

Stub Axle Carriers (2) Rqrs 5X11x4mm Bb

This is a pair of Stub Axle Carriers
for the Traxxas Bandit, Stampede and Rustler VXL.

FEATURES:
Molded nylon building and construction (black)

CONSISTS OF:
Two stub axle carriers

NEEDS:
Installation on the car

Numerous others have actually purchased this item together with the item that you are presently reviewing.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made of stainless-steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Likewise called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Right here is a great item that numerous others have actually bought at the exact same time.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Construction

CONSISTS OF:
Two Blocks

NEEDS:
Traxxas Rustler or Stampede

You will certainly like this thing if you have the thing previously pointed out.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

You will certainly like this thing if you have the thing previously pointed out.

Stub Axle Housing (2)

These are the axle housings (or hub carriers) utilized on the: Rad 2, Hawk 2,
Eagle, Blue Eagle LS II and Nitro Rustler. The housings are molded of
black nylon.

Includes: 2 axle housings

pcd 01/23/94

Numerous others have actually purchased this item together with the item that you are presently reviewing.

Stub Axles Rear (2)

These are the Rear Stub Axles
for the Traxxas Bandit, Stampede and Rustler.

FEATURES:
Metal building and construction, black and silver in color

CONSISTS OF:
Two rear stub axles and pins

SPECIFICATIONS:
Length: 1.65" (42mm)
Size: .51" (13mm) at largest point