Traxxas Xo-1 Connector Power Tab

This is the Power Tap Adapter for the Traxxas XO-1, TRAD42**.

FEATURES:
Changes damaged power tap connectors

CONSISTS OF:
Adapter with Wire and Red 2-Pin Adapter and Zip Tie

This product praises the main item below.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Spur Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal building

CONSISTS OF:
2 different plasting holders
One disk-shaped magnet
Three 8mm screws
Three 10mm screws

SPECIFICATIONS:
Magnet diameter: 5mm
Magnet thickness: 2mm

The listed below product also sets truly well with the product being reviewed.

Mount, Temp Sensor (Electric Motors)-Wire Tie/Thermal Pad

This is the Temperature Sensor Mount for the Traxxas TQi Telemetry System.

FEATURES:
For use with electrical powered Traxxas cars

CONSISTS OF:
Mount, Plastic Tie, and Thermal Pad

This is a wonderful enhancement to the product currently being reviewed.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FEATURES:
Fully put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping sections from dirt
Connects to the differential with one screw pin
Works on the front or rear, right or left of automobile

CONSISTS OF:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Guideline sheet

REQUIRES:
Setting up on chassis

You will certainly love this thing if you have the thing above mentioned.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for use on the E-Revo

FEATURES:
Stainless-steel bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 6x13x5mm ball bearings Part #5180

SPECIFICATIONS:
Inside diameter: 6mm (0.24")
Outside diameter: 13mm (0.51")
Width: 5mm (0.20")

Want one more terrific product to compliment the above discussed product?

Sensor Temperature/Voltage Short

This is the Short Temperature and Voltage Sensor from Traxxas.

FEATURES:
Functions with the Traxxas Link system to display battery voltage and
    temperature level

CONSISTS OF:
Short Temperature and Voltage Sensor

SPECIFICATIONS:
Length: 9.5" (241mm)

This is a wonderful enhancement to the product currently being reviewed.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise known as a JST connector.

FEATURES:
Created for use with most Park Flyer ElectriFly electronics
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality assurance

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female connectors with wire, use GPMM3107
This connector can be utilized to change BEC-type connectors.

You will certainly love this thing if you have the thing above mentioned.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

CONSISTS OF:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Guideline sheet

REQUIRES:
2 plans needed to finish truck