Suppo Model 1250Kv Brushless Outrunner Motor, 4MM Shaft, 3.5MM Bullet Conn

LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1250Kv
Max. efficiency present: 5-18 Amp
NoLoad current / 1.0 Amp
Present capability: 18 A/60 s
Max. Effectiveness: 75%
Shaft diameter: 4mm

Recommended Model Weight: 300 - 800 g
Suggested Prop w/o Gearbox: 2s - 10 x 4.7; 3s - 9 x 5

This is a great enhancement to the product currently being reviewed.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

CONSISTS OF:
2 control horns w/4 adjusting holes and 2 installing holes
(3/4" long [tall])
2 installing plates w/2 installing holes (3/8"x3/8")
4 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "consists of" above

Frequently bought with the product that you are currently reviewing.

9x6 Thin Electric Prop

This is one R/C Aircraft 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are manufactured using a pultrusion procedure. This method
    ca{uses|triggers} the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting a higher fiber (60%) to resin (nylon binder)
    density. Providing substantially greater strength and tightness than
    glass filled nylon.
The extra tightness is helpful to control of vibration
    resonance response.
The greater strength permits the use of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

NEEDS:
ALL props need balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Diameter: 9"
Prop Pitch: 6
Hub Thickness: 0.40"
Hub Diameter: 0.79"
Weight: 0.035lbs
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with glow engines.

Want an additional great product to enhance the above stated product?

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Dimension : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging content:
1 x 9g TITAN Servo Sets (with accessories)

This product praises the main item here.

EC3 Device Connector (2)

Specs
Battery/Charger Add-on: Adapters
Connector Type: EC3

Right here is a great product that lots of others have actually purchased the same time.

10x4.7 Slow Flyer Propeller

This is a 10x4.7 Slo-Flyer "tractor" (not a "pusher") aircraft propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building reduces turning mass for
    greater output and longer life.
Reinforcing carbon fibers assist keep real, consistent pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft finding rings
One finding ring instruction sheet

NEEDS:
ALL props need balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 10"
Pitch: 4.7

REMARKS:
Slo-Flyer props are Not developed for Glow engines