Dynamite EC3 Device Connector (2)

Specs
Battery/Charger Add-on: Ports
Connector Type: EC3

Right here is an additional item that compliments the item being discussed.

EC3 Battery Connector (2)

Specs
Battery/Charger Add-on: Ports
Connector Type: EC3

This item compliments the main item right here.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

INCLUDES:
2 control horns w/4 adjusting holes and 2 installing holes
(3/4" long [tall])
2 installing plates w/2 installing holes (3/8"x3/8")
4 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECS:
See "includes" above

Regularly bought with the item that you are currently reading about.

EC3 Battery Connector (2)


Features



Efficient in 60 constant ampsErgonomically pleasing and easy to gripProtected to avoid shorting and reverse polaritySuperior technology fit to today's advanced applicationsConnectors are factory-installed with ParkZone® F-27C Stryker, E-flite PNP airplane,Designed with benefit and dependability in mind




Summary


E-flite's high-quality EC3 adapters and leads should be a staple for every single workbench. EC3 (E-flite Port 3.5mm) adapters, leads with adapters, and accessories are ideal for electric power applications and deal with any battery, charger, ESC, Power Meter, etc.







Tech Notes


You will require...
EC3 Gadget Port (EFLAEC301)



Want an additional wonderful item to compliment the above mentioned item?

1.86" Micro Sport Wheels

This is a set of 2 Du-Bro 1.86" Micro Sport Wheels.

FEATURES:
Lightweight foam building
Pre-mounted on 5-spoke white plastic wheels

INCLUDES:
2 1.86" (47mm) Micro Sport Wheels

REQUIRES:
Assembly on vehicle.

SPECS:
Tire Size: 47mm (1.85")
Tire Width: 8mm (.31")
Hole Size: 2mm

This item compliments the main item right here.

Mini E/Z Connector 2/Pkg

These are Mini E-Z Connectors for Park Flyers by Dubro.

FEATURES:
Aluminum Building

INCLUDES:
2 Connectors
2 Screws
2 Washers

REQUIRES:
Nothing

SPECS:
Length: 4.8mm (3/16")
Size: 3.2mm (1/8")
Weight: 0.25g (0.0088oz)

REMARKS:
Optimum pushrod diameter is .047 - 3/64" (1.22mm)

You will certainly love this product if you have the product above discussed.

EC3 Device & Battery Connector


Features



Efficient in 60 constant ampsErgonomically pleasing and easy to gripProtected to avoid shorting and reverse polaritySuperior technology fit to today's advanced applicationsConnectors are factory-installed with ParkZone® F-27C Stryker, E-flite PNP airplane,Designed with benefit and dependability in mind




Summary


E-flite's high-quality EC3 adapters and leads should be a staple for every single workbench. EC3 (E-flite Port 3.5mm) adapters, leads with adapters, and accessories are ideal for electric power applications and deal with any battery, charger, ESC, Power Meter, etc.

This is a great addition to the item currently being discussed.

10x4.7 Slow Flyer Propeller

This is a 10x4.7 Slo-Flyer "tractor" (not a "pusher") airplane propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building minimizes rotating mass for
    higher output and longer life.
Reinforcing carbon fibers help preserve real, consistent pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring instruction sheet

REQUIRES:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 10"
Pitch: 4.7

REMARKS:
Slo-Flyer props are Not developed for Glow engines