APC 9x6 Thin Electric Prop

This is one R/C Aircraft 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are produced utilizing a pultrusion procedure. This approach
    usages|triggers} the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, allowing for a greater fiber (60%) to resin (nylon binder)
    density. Supplying considerably higher strength and stiffness than
    glass filled nylon.
The additional stiffness is helpful to control of vibration
    resonance response.
The higher strength permits the use of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Diameter: 9"
Prop Pitch: 6
Center Thickness: 0.40"
Center Diameter: 0.79"
Weight: 0.035lbs
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with glow engines.

This thing compliments the above discussed thing.

9x6EP Thin Electric Pusher Prop

This is a 9x6E Thin Electric Pusher Propeller from
Advanced Precision Composites.

FEATURES:
Gray composite one-piece building and construction

INCLUDES:
One 9x6E Thin Electric Pusher Propeller with 0.128, 0.158, 0.197,
    0.237 and 0.313" adapter rings

REQUIRES:
ALL props require balancing, this is EXTREMELY important, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 9"
Pitch: 6
Center inner diameter: 0.25" (6.35mm)

COMMENTS:
For electric use only. Do not use with gasoline or nitro powered
    airplane.

Lots of others have actually gotten this thing in addition to the thing that you are presently checking out.

9x7.5 Thin Electric Prop

This is a 9x7.5E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props require balancing, this is CRUCIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 9" (229mm)
Pitch: 7.5
Center inner diameter: 0.25" (605mm)

Here is one more thing that compliments the thing being discussed.

Cowl: Cub




This thing compliments the main item here.

7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Precision Composites.
For use on electric powered airplane only (not for glow engines).

FEATURES:
Gray composite building and construction
Has two adapter rings that adapt to different motor shafts

INCLUDES:
One 7x6EP Thin Electric Propeller

REQUIRES:
ALL props require balancing, this is CRUCIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 7"
Pitch: 6
Center inner diameter: 0.25" (6.3mm)

The below thing also pairs actually well with the thing being discussed.

8x6 Thin Electric Prop

This is a 8x6E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props require balancing, this is CRUCIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 8"
Pitch: 6
Center inner diameter: 0.25"