APC 9x6EP Thin Electric Pusher Prop

This is a 9x6E Thin Electric Pusher Propeller from
Advanced Precision Composites.

FEATURES:
Gray composite one-piece building

INCLUDES:
One 9x6E Thin Electric Pusher Propeller with 0.128, 0.158, 0.197,
    0.237 and 0.313" adapter rings

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 9"
Pitch: 6
Center inner diameter: 0.25" (6.35mm)

COMMENTS:
For electrical use only. Do not utilize with gas or nitro powered
    airplane.

This is a amazing addition to the thing presently being reviewed.

9x6 Thin Electric Prop

This is one R/C Plane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are produced utilizing a pultrusion procedure. This approach
    triggers the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, allowing for a higher fiber (60%) to resin (nylon binder)
    density. Providing considerably greater strength and tightness than
    glass filled nylon.
The additional tightness is advantageous to control of vibration
    resonance response.
The greater strength enables the use of thinner cross-sections,
    advantageous to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Diameter: 9"
Prop Pitch: 6
Center Density: 0.40"
Center Diameter: 0.79"
Weight: 0.035pounds
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with radiance engines.

You will enjoy this product if you have the product earlier pointed out.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Measurement : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with devices)

Want one more great thing to match the above discussed thing?

A2217-8 1100Kv Brushless Outrunner Motor, 4mm Shaft, 3.5mm Bulle

A2217-8 Brushless motor Specification

No. Of cells:
Ni-MH: 6-10
LiPo: 2-3

RPM/V: 1100KV

Max. effectiveness present: 5-16 A(>75%)

NoLoad current/ 10 V: 1.0 A

Current capability: 18 A/60 s

Max. effectiveness: 81%

Shaft diameter: 4 mm

Weight with cables: 70 g

Internal Resistance: 125m

Measurements (mm): 27.5 x 30

Suggested Model Weight: 300-800 g

Recommended Prop: 10 x 5 or 11 x 5

This is a amazing addition to the thing presently being reviewed.

2250mAh 11.1V 35C - Ultra Power Series

Pulse Ultra batteries bring a new level of power to the RC scene, based upon cutting edge lithium polymer technology, and taking advantage of all the technological gains within this incredible industry. Pulse is about power & efficiency at an expense that can be paid for. Not does premium power come at a premium cost – Pulse provides it all in one pulse speeding up punch.

Delivering intense power for your RC applications, Pulse batteries deliver everything you could picture at a cost never seen. Adding to the addicting power of Pulse Ultra batteries is the 5C charge rate, enabling you to charge in rapid succession, leaving previous 1C LiPo batteries back at the charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every way possible, delivering mind numbing power levels that will take your flight to a totally new level of extreme. If you're looking for power, you simply found it. Pulse provides intense power for intense pilots, and when it pertains to value, Pulse just can't be beat.
Feel the pulse, and get a new Pulse Ultra Battery for your 3D demands!

Specifications:

Cell Count: 3S
Capacity: 2250mah
Discharge Rate: 30C
Charge Rate: 5C
Measurements: 155mm x 45mm x 50mm (LxWxH)
Weight: 799g
Balance Tap: JST-XH
AWG: TBA (To Be Reported)

Product Note:

Pulse batteries do not included power leads, and will require completion user to solder their own style of battery adapter for the battery to be correctly utilized. Pulse batteries have bare leads covered with heat diminish defense, and are all set for the adapter of choice to be soldered to the positive/negative leads.

Pulse Details:

www.pulsebattery.com

Pulse FAQ:

Limited Service warranty

Pulse Batteries include a service warranty versus any malfunctioning batteries we manufacture, and service warranty all manufacturer related defects or flaws. Pulse guarantees that all packs are correctly balanced, but please be sure to inspect your Pulse battery upon arrival for any faults, such as low voltage, cell imbalances, solder joints, and other such problem. If any such flaws arise, Pulse will be sure to cover all claims within a 90 day period; all claims after the 90 day period of purchase will not go through service warranty, so please be sure to thoroughly inspect your new Pulse battery upon arrival.

In terms of service warranty, if any service warranty related concerns arise, or item flaws are seen, please call the supplier you purchased your Pulse battery from, as the supplier will manage service warranty related matters.

Pulse Batteries – Your Concerns End Here.

Have a question regarding Pulse batteries? We have actually assembled a spread of lots of questions that are asked about Lithium Polymer batteries, along with Pulse batteries too. Naturally, if you do not find your response here, do not hesitate to drop us a line, as we are always happy to help.



Q: What is a "C" score, and exactly what does it indicate to me?

A: "C" ratings are categorized in (2) locations – discharge rate, and charge rate. Pulse Batteries are ranked at 35C, 45C, and 65C in discharge rates – this is based upon just how much amperage can be provided, or in easier terms, just how much power your battery needs to give. The greater the "C" score, the more power the battery can give out.

As for the charge rate, Pulse batteries are ranked at 5C, which implies they can be charged 5 times faster than a standard 1C Lithium Polymer battery. Simply put, Pulse batteries can be charged at very high rates of power for rapid charge times, eliminating the wait time of standard batteries that are restricted to 1C.

Q: What is mah, or capability, in regards to Pulse batteries?

A: "Mah" short for milliamp hours, is a reading of capability, or just how much energy the battery has the ability to store. Mah, or Capacity, directly associates with flight time, and indirectly associates with power output, as greater capability batteries likewise have higher amperage to deliver, when asked to do so.

Q: How long does it take a Pulse battery to charge?

A: Considering Pulse batteries are ranked at a 5C charge rate, if your charger can deliver the essential amperage to charge at 5C, charge times can be as low as 15 minutes, relying on the charger being used.

Q: How can I figure out the number of amps my Pulse battery can be charged at?

A: To figure out the number of amps you can safely charge a Pulse battery, a little math remains in order. We will utilize a basic formula to figure out charge rates - divide the "mah" of the battery by 1,000 (let's state a 2200mah battery), which pertains to 2200 / 1,000 = 2.2. Now, multiply it versus the "charge" score of the battery, which in this case is 5C – 2.2 x 5 = 11. So, if we have a 2200mah 5C battery (2200 divided by 1,000 = 2.2), we have 2.2 as our base number, which we then multiply versus the charge score of "5C" which gives us a variety of 11 – (2.2 x 5 = 11). What this implies is that at a 5C score, a 2200mah Pulse battery can being charged at 11.0A amps of power.