APC 9x7.5 Thin Electric Prop

This is a 9x7.5E Thin Composite propeller from Advanced Precision Composites.
For usage|utilize} on Electric powered aircraft just (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, usage|utilize} TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 9" (229mm)
Pitch: 7.5
Center inner diameter: 0.25" (605mm)

You will like this thing if you have the thing earlier mentioned.

9x6 Thin Electric Prop

This is one R/C Aircraft 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are manufactured using a pultrusion process. This method
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, allowing for a greater fiber (60%) to resin (nylon binder)
    density. Supplying significantly greater strength and tightness than
    glass filled nylon.
The added tightness is helpful to control of vibration
    resonance response.
The greater strength allows the usage of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props require balancing (usage TOPQ5700).
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Size: 9"
Prop Pitch: 6
Center Density: 0.40"
Center Size: 0.79"
Weight: 0.035pounds
Engine Shaft Size: N/A

COMMENTS:
Not for use with glow engines.

This item compliments the main item right here.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum building and construction

INCLUDES:
One Prop Saver
Two Rubber O-Rings
Two Bushings

REQUIRES:
Installation on Rimfire 28mm Motor

Numerous others have actually acquired this item along with the item that you are presently checking out.



These are the ElectriFly Prop Saver O-rings from Fantastic Planes.

FEATURES:
Twists around the prop to hold it on and secure it during crashes

INCLUDES:
5 prop saver O-rings

REQUIRES:
Installation

Numerous others have actually acquired this item along with the item that you are presently checking out.

7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Precision Composites.
For use on electric powered aircraft just (not for radiance engines).

FEATURES:
Gray composite building and construction
Includes two adjuster rings that adapt to various motor shafts

INCLUDES:
One 7x6EP Thin Electric Propeller

REQUIRES:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 7"
Pitch: 6
Center inner diameter: 0.25" (6.3mm)

Below is a wonderful item that lots of others have actually bought at the very same time.

8x8 Thin Electric Propeller

This is a 8x8E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft just (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 8" (203mm)
Pitch: 8
Center inner diameter: 0.25" (6.3mm)