APC 7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Accuracy Composites.
For use on electrical powered aircraft just (not for radiance|radiance} engines).

FUNCTIONS:
Gray composite building
Has 2 adjuster rings that adapt to different motor shafts

INCLUDES:
One 7x6EP Thin Electric Propeller

REQUIRES:
ALL props need balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 7"
Pitch: 6
Hub inner diameter: 0.25" (6.3mm)

This is a great addition to the item presently being gone over.

7x5 Thin Electric Prop

This is a 7x5E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered aircraft just (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 2 adjuster rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
Two composite adapter rings
One direction sheet

REQUIRES:
ALL props need balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 7"
Pitch: 5
Hub inner diameter: 0.25"

This is a great addition to the item presently being gone over.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum building

INCLUDES:
One Prop Saver
Two Rubber O-Rings
Two Bushings

REQUIRES:
Installation on Rimfire 28mm Motor

This item is regularly acquired with the above discussed item.

8x6 Thin Electric Prop

This is a 8x6E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered aircraft just (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adjuster rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props need balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 8"
Pitch: 6
Hub inner diameter: 0.25"

Get this item to improve the one you read about.

9x6 Thin Electric Prop

This is one R/C Plane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are produced utilizing a pultrusion procedure. This approach
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting a greater fiber (60%) to resin (nylon binder)
    density. Offering considerably greater strength and tightness than
    glass filled nylon.
The additional tightness is beneficial to control of vibration
    resonance response.
The greater strength allows the use of thinner cross-sections,
    beneficial to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props need balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Size: 9"
Prop Pitch: 6
Hub Thickness: 0.40"
Hub Size: 0.79"
Weight: 0.035lbs
Engine Shaft Size: N/A

COMMENTS:
Not for use with glow engines.