APC 7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Accuracy Composites.
For use on electric powered aircraft just (not for radiance engines).

FEATURES:
Gray composite building and construction
Features two adapter rings that adapt to different motor shafts

CONSISTS OF:
One 7x6EP Thin Electric Propeller

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 7"
Pitch: 6
Hub inner diameter: 0.25" (6.3mm)

This is a amazing enhancement to the product currently being gone over.

7x5 Thin Electric Prop

This is a 7x5E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered aircraft just (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with two adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
Two composite adapter rings
One guideline sheet

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 7"
Pitch: 5
Hub inner diameter: 0.25"

This is a amazing enhancement to the product currently being gone over.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum building and construction

CONSISTS OF:
One Prop Saver
Two Rubber O-Rings
Two Bushings

REQUIRES:
Installation on Rimfire 28mm Motor

This product is regularly acquired with the above stated product.

8x6 Thin Electric Prop

This is a 8x6E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered aircraft just (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 8"
Pitch: 6
Hub inner diameter: 0.25"

Get this product to enhance the one you are reading around.

9x6 Thin Electric Prop

This is one R/C Airplane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are manufactured utilizing a pultrusion procedure. This technique
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, allowing for a greater fiber (60%) to resin (nylon binder)
    density. Providing significantly greater strength and stiffness than
    glass filled nylon.
The additional stiffness is helpful to control of vibration
    resonance response.
The greater strength allows the use of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Diameter: 9"
Prop Pitch: 6
Hub Density: 0.40"
Hub Diameter: 0.79"
Weight: 0.035pounds
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with glow engines.