Axial Nylon Locknut M4 Black (10)

This is the M4 Nylon Lock Nut
for the Axial Scorpion Rock Crawler.

FEATURES:
Black oxide metal construction

INCLUDES:
10 M4 nylon lock nuts

NEEDS:
Installation on the Rock Crawler

Want one more terrific item to match the above mentioned item?

Aluminum Hex Hub 12mm Black (4)

These are the 12mm Aluminum Hex Hubs for the Axial Scorpion

FEATURES:
Aluminum construction, black in color
Replaces worn or broken hex hubs

INCLUDES:
4 aluminum hex hubs
4 steel drive pins
4 set screws

NEEDS:
Installation following the model handbook

SPECS:
Diameter: .47" (12mm)

This item is regularly purchased with the above mentioned item.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal construction, black in color

INCLUDES:
10 nylon locking hex nuts

NEEDS:
Installation on the Scorpion

SPECS:
Thickness: 4mm
External diameter: 6mm
Inner diameter: 2mm

The listed below item also sets really well with the item being discussed.



This is the 2.5mm E-Clips for the Axial Rock Crawler.

FEATURES:
Metal construction, silver in color

INCLUDES:
10 2.5mm e-clips

NEEDS:
Installation to the model

The listed below item also sets really well with the item being discussed.

King Kong Tow Shackle

This is the King King Tow Shackle for the 1/10 scale Warn Hook.

FEATURES:
Heavy duty steel construction
Fits the Z-S1011 1/10 Warn Hook, RC4C1011

INCLUDES:
King King Tow Shackle

SPECS:
Outer Width: 0.49" (12.49mm)
Inner Width: 0.24" (6.21mm) at largest point

Want one more terrific item to match the above mentioned item?



This is the optional Metal Gear Set for the Locked Transmission
in the Axial AX10, SCX10 and Wraith.

FEATURES:
CNC machined steel equipments
Replaces stock plastic equipments
Suitable for high power applications with big brushless motors
Suitable with all Axial 3-gear transmissions

INCLUDES:
Three Steel Gears

Below is a terrific item that lots of others have bought at the same time.

1/10 Hi-Lift Jack

Several others have purchased this item together with the item that you are currently reviewing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Want one more terrific item to match the above mentioned item?

Rod Ends Revo Large W/ Hollow Balls

This is the Big Rod End Set for the Traxxas Revo.

FEATURES:
Plastic construction
Black in color
Metal Pivot Balls

INCLUDES:
12 Rod Ends
12 Pivot Balls

NEEDS:
Assembly to automobile

SPECS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Frequently purchased with the item that you are currently reviewing.

Hexagon Screw Driver

Utilizing on heli's M2 socket screw and M3 socket screw!

Requirements:
1.5mm(Black/26.6g)x1
2.0mm(Blue/28.6g)x1
2.5mm(Purple/29.5g)x1
3.0mm(Red/31g)x1

This is a wonderful addition to the item currently being discussed.



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is best for all electronic applications.

Below is a terrific item that lots of others have bought at the same time.

AM27 540 Electric Motor

This is the Axial 27T 540 Electric Motor.

FEATURES:
540 size can replaces numerous stock motors

INCLUDES:
One 540 27T Electric Motor

NEEDS:
ESC

SPECS:
Shaft Diameter: 3mm (0.12")
Shaft Length: 12.45mm (0.49")
Can Diameter: 36mm (1.42")
Can Length: 49.7mm (1.96")
Overall Length: 72mm (2.83")
Wire length: 88.9mm (3.5")
Specs such as input voltage and weight were not supplied by
producer