Axial Nylon Locknut M4 Black (10)

This is the M4 Nylon Lock Nut
for the Axial Scorpion Rock Crawler.

FEATURES:
Black oxide metal construction

INCLUDES:
Ten M4 nylon lock nuts

NEEDS:
Setup on the Rock Spider

Want one more fantastic item to compliment the above mentioned item?

Aluminum Hex Hub 12mm Black (4)

These are the 12mm Aluminum Hex Hubs for the Axial Scorpion

FUNCTIONS:
Aluminum construction, black in color
Changes worn or damaged hex hubs

INCLUDES:
Four aluminum hex hubs
Four steel drive pins
Four set screws

NEEDS:
Setup following the design manual

SPECS:
Diameter: .47" (12mm)

This item is often bought with the above mentioned item.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal construction, black in color

INCLUDES:
Ten nylon locking hex nuts

NEEDS:
Setup on the Scorpion

SPECS:
Thickness: 4mm
External diameter: 6mm
Inner diameter: 2mm

The below item additionally sets actually well with the item being reviewed.

E-Clip E2.5 (10)

This is the 2.5mm E-Clips for the Axial Rock Crawler.

FEATURES:
Metal construction, silver in color

INCLUDES:
Ten 2.5mm e-clips

NEEDS:
Setup to the design

The below item additionally sets actually well with the item being reviewed.

King Kong Tow Shackle

This is the King King Tow Shackle for the 1/10 scale Warn Hook.

FEATURES:
Strong steel construction
Fits the Z-S1011 1/10 Warn Hook, RC4C1011

INCLUDES:
King King Tow Shackle

SPECS:
Outer Width: 0.49" (12.49mm)
Inner Width: 0.24" (6.21mm) at widest point

Want one more fantastic item to compliment the above mentioned item?

Locked Transmission AX10 SCX10 Wraith

This is the optional Metal Equipment Set for the Locked Transmission
in the Axial AX10, SCX10 and Wraith.

FEATURES:
CNC machined steel equipments
Changes stock plastic equipments
Ideal for high power applications with huge brushless motors
Suitable with all Axial 3-gear transmissions

INCLUDES:
Three Steel Gears

Right here is a fantastic item that several others have actually purchased the very same time.

1/10 Hi-Lift Jack

Several others have actually bought this item along with the item that you are presently reviewing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Want one more fantastic item to compliment the above mentioned item?

Rod Ends Revo Large W/ Hollow Balls

This is the Big Rod End Set for the Traxxas Revo.

FEATURES:
Plastic construction
Black in color
Metal Pivot Balls

INCLUDES:
12 Rod Ends
12 Pivot Balls

NEEDS:
Assembly to automobile

SPECS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Often bought with the item that you are presently reviewing.

Hexagon Screw Driver

Using on heli's M2 socket screw and M3 socket screw!

Specs:
1.5mm(Black/26.6g)x1
2.0mm(Blue/28.6g)x1
2.5mm(Purple/29.5g)x1
3.0mm(Red/31g)x1

This is a wonderful addition to the item presently being reviewed.



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is best for all electronic applications.

Right here is a fantastic item that several others have actually purchased the very same time.

AM27 540 Electric Motor

This is the Axial 27T 540 Electric Motor.

FEATURES:
540 size can replaces lots of stock motors

INCLUDES:
One 540 27T Electric Motor

NEEDS:
ESC

SPECS:
Shaft Diameter: 3mm (0.12")
Shaft Length: 12.45mm (0.49")
Can Diameter: 36mm (1.42")
Can Length: 49.7mm (1.96")
Total Length: 72mm (2.83")
Wire length: 88.9mm (3.5")
Specs such as input voltage and weight were not supplied by
manufacturer