Axial E-Clip E2.5 (10)

This is the 2.5mm E-Clips for the Axial Rock Crawler.

FEATURES:
Metal building and construction, silver in color

CONSISTS OF:
Ten 2.5mm e-clips

REQUIRES:
Installation to the model

Get this item to enhance the one you read about.

Input Shaft 5x29mm (2)

These are the Input Shafts for the Axial Wraith Rock Racer.

FEATURES:
Steel building and construction
Holds bevel gear in place inside transmission

CONSISTS OF:
2 5x29mm Input Shafts

REQUIRES:
Disassembly of transmission to install

This item is regularly gotten with the above pointed out item.



These are the 5x1mm O-Rings from Axial.

FEATURES:
Rubber building and construction
Orange in color

CONSISTS OF:
Ten O-Rings

SPECS:
Outer Diameter: 6.5mm (0.25")
Inner Diameter: 5mm (0.196")
Density: 1mm (0.039")

Lots of others have gotten this item in addition to the item that you are currently reviewing.

Nylon Locknut M4 Black (10)

This is the M4 Nylon Lock Nut
for the Axial Scorpion Rock Crawler.

FEATURES:
Black oxide metal building and construction

CONSISTS OF:
Ten M4 nylon lock nuts

REQUIRES:
Installation on the Rock Spider

This is a amazing addition to the item currently being reviewed.



This is the replacement Bevel Gear Set for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Aluminum building and construction, silver in color
Changes a used or damaged bevel gear set

CONSISTS OF:
One 38 Tooth Large Bevel Gear
One 13 Tooth Small Bevel Gear

REQUIRES:
Installation following the model manual

REMARKS:
For the durable version of this gear set order AXIC0395