Axial Bearing 5x11x4mm

This is a set of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building and construction, silver in color
Sealed design assists keep the bearing running smooth and friction complimentary

CONSISTS OF:
Two Bearings

NEEDS:
Setup following the design manual

SPECS:
Inside Diameter: 5mm
Outside Diameter: 11mm
Density: 4mm

Want another fantastic thing to enhance the above discussed thing?

Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building and construction, silver in color
Protected to help keep the bearing running smooth and friction complimentary

CONSISTS OF:
Two Bearings

NEEDS:
Setup following the design manual

SPECS:
Inside Diameter: 10mm
Outside Diameter: 15mm
Density: 4mm

This thing is often gotten with the above discussed thing.

Bearing 15x21x4mm (2)

This is a set of 10x15x4mm Bearings from Axial.

FEATURES:
Stainless steel building and construction, silver in color
Protected to help keep the bearing running smooth and friction complimentary

CONSISTS OF:
Two Bearings

NEEDS:
Setup following the design manual

SPECS:
Inside Diameter: 15mm
Outside Diameter: 21mm
Density: 4mm

Get this thing to improve the one you read around.



These are the CNC Machined Precision Aluminum Steering Knuckles
For the Axial Wraith

FEATURES:
Our CNC Machined Aluminum Front Steering knuckles considerably improves
the durability on your Axial Wraith, and improves the steering
reaction by getting any flex of the stock plastic device. The
C-Hubs likewise includes more durability and eliminate any undesirable flex for
the Axial Wraith and it has the same dimensions and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
Two steering knuckles
4 M39x9mm cap head screws with hex sockets

SPECS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

REMARKS:
These knuckles can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Package (AXID9020)

Right here is another thing that praises the thing being reviewed.



This is the 38T Sturdy Bevel Gear Set for the Scorpion.

FEATURES:
Metal building and construction, black in color

CONSISTS OF:
One pinion gear
One 38T gear

NEEDS:
Setup

Want another fantastic thing to enhance the above discussed thing?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pushed fiber building and construction
Changes used slipper pads

CONSISTS OF:
Slipper Pad for the Axial Scorpion

NEEDS:
Installing in slipper clutch assembly following instructions in
    manual

Numerous others have actually gotten this thing in addition to the thing that you are currently checking out.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic building and construction

CONSISTS OF:
One 48DP 87T stimulate gear

NEEDS:
Setup on the Rock Crawler

The listed below thing also pairs truly well with the thing being reviewed.

Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Pipes
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal building and construction, black in color

CONSISTS OF:
4 3x4.5x5.5 flange pipelines

NEEDS:
Setup on the Rock Crawler

SPECS:
Length: .21" (5.5mm)
Diameter: .17" (4.5mm) at tiniest point
Diameter: .27" (7mm) at biggest point