Axial Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Shielded to help keep the bearing running smooth and friction free

INCLUDES:
2 Bearings

NEEDS:
Installation following the design manual

SPECS:
Inside Diameter: 10mm
Outside Diameter: 15mm
Density: 4mm

This product praises the above reviewed product.

Bearing 5x11x4mm

This is a set of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Sealed design assists keep the bearing running smooth and friction free

INCLUDES:
2 Bearings

NEEDS:
Installation following the design manual

SPECS:
Inside Diameter: 5mm
Outside Diameter: 11mm
Density: 4mm

Want one more wonderful product to enhance the above stated product?

Bearing 5x10x4mm

This is a set of replacement 5x10x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Sealed design assists keep the bearing running smooth and friction free

INCLUDES:
2 Bearings

NEEDS:
Installation following the design manual

SPECS:
Inside Diameter: 5mm
Outside Diameter: 10mm
Density: 4mm

Regularly bought with the product that you are presently reading about.

Bearing 8x16x5mm

This is a set of replacement 8x16x5mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Sealed design assists keep the bearing running smooth and friction free

INCLUDES:
2 Bearings

NEEDS:
Installation following the design manual

SPECS:
Inside Diameter: 8mm
Outside Diameter: 16mm
Density: 5mm

Here is one more product that praises the product being reviewed.



These are the CNC Machined Accuracy Aluminum Steering Knuckles
For the Axial Wraith

FUNCTIONS:
Our CNC Machined Aluminum Front Steering knuckles significantly enhances
the durability on your Axial Wraith, and enhances the steering
response by taking out any flex of the stock plastic device. The
C-Hubs also includes more durability and remove any undesirable flex for
the Axial Wraith and it has the exact same measurements and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
2 guiding knuckles
4 M39x9mm cap head screws with hex sockets

SPECS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

COMMENTS:
These knuckles can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Kit (AXID9020)

Here is a wonderful product that lots of others have actually purchased the exact same time.

Lectron Pro 7.4V 5200mAh 50C Lipo Deans

5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is best for 1/10 scale vehicles, trucks, and buggies! Features a huge capability for prolonged run times and a gigantic C rating so you'll have all the power you'll ever require. Consists of a Deans-type connector on the discharge leads.
Features

High-end efficiency and reliability at an affordable rate
Perfect for 1/10 scale vehicles, trucks, and buggies
Features a huge capability for prolonged run times and a gigantic C rating so you'll have all the power you'll ever require
Consists of a Deans-type connector on the discharge leads

Specifications

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 266 g