Axial Aluminum Hub Narrow 12mm Black (4)

These are the 12mm Narrow Aluminum Hex Hubs from Axial.

FEATURES:
Aluminum building, black in color
Changes used or damaged hex hubs

CONSISTS OF:
Four aluminum hex hubs
Four steel drive pins
Four set screws

REQUIRES:
Installation following the model handbook

SPECS:
Hex Size: .47" (12mm)

This product is frequently purchased with the above stated product.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Assembly to vehicle

SPECS:
Inner Size: 10mm
Outer Size: 15mm
Side Density: 4mm

COMMENTS:
These bearings are used to support the Primary Clutch (one required).

You will like this item if you have the item just above discussed.



These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
8 hole design, built of super strong composite product
Gray aluminum ring
Fits 12mm hex hubs
Real beadlock design, no messy gluing needed

CONSISTS OF:
2 Axial 2.2 Beadlock Wheels in Black with ring mounting hardware

REQUIRES:
Tires of modeler's option

SPECS:
Width: 1.4" (36mm)
Beadlock Size: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

The listed below product additionally pairs actually well with the product being discussed.

55T Electric Motor

This is the Axial 55T Rock Spider Electric Motor.

FEATURES:
Equip or upgrade the Axial AX10 RTR or other rock crawlers for more
    low end pull and slower speed while crawling than stock 27 turn
    motors
Preinstalled bullet ports, no soldering needed

CONSISTS OF:
Axial 55T Rock Spider Electric Motor with bullet ports

REQUIRES:
Suitable speed control for rock crawler motors

SPECS:
Shaft Size: 3.2mm (0.12")
Shaft Length: 12.5mm (0.49")
Can Size: 36mm (1.4")
Can Length: 50.75 (2")
Weight: 164g (5.8oz)
Installing Pattern: 25mm (0.98" )
Wire length: 115mm (4.5")
Input Voltage: 4+ cells (12VDC) max

This product is frequently purchased with the above stated product.



    This is a pair of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber building, grey in color
Changes used or damaged differential gaskets

CONSISTS OF:
2 Differential Gaskets

REQUIRES:
Installation following the model handbook

SPECS:
Outdoors Size: 1" (25mm)
Inside Size: .67" (17mm)
Density: .020" (.52mm)

This product compliments the main item here.

Pinion 48P 14T Steel

This is the optional 48 Pitch 14 Tooth Steel Pinion Equipment
for the Axial Wraith Rock Racer, AXID9018.

FEATURES:
Constructed of solidified steel for long life

CONSISTS OF:
48 Pitch 14 Tooth Steel Pinion Equipment with Set Screw

REQUIRES:
Fastening to motor shaft

SPECS:
Equipment Pitch: 48
Variety of Teeth: 14

Right here is a terrific product that lots of others have bought at the same time.

Aluminum Hex Hub 12mm Black (4)

These are the 12mm Aluminum Hex Hubs for the Axial Scorpion

FUNCTIONS:
Aluminum building, black in color
Changes used or damaged hex hubs

CONSISTS OF:
Four aluminum hex hubs
Four steel drive pins
Four set screws

REQUIRES:
Installation following the model handbook

SPECS:
Size: .47" (12mm)