APC 7x5 Thin Electric Prop

This is a 7x5E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft just (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 2 adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Two composite adapter rings
One guideline sheet

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 7"
Pitch: 5
Center inner diameter: 0.25"

You will certainly love this product if you have the product previously discussed.

7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Precision Composites.
For utilize on electric powered aircraft just (not for radiance engines).

FUNCTIONS:
Gray composite construction
Features 2 adapter rings that adapt to different motor shafts

CONSISTS OF:
One 7x6EP Thin Electric Propeller

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 7"
Pitch: 6
Center inner diameter: 0.25" (6.3mm)

Below is another product that praises the product being talked about.



This is a 6x5.5E Thin Composite Propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft just (not for radiance engines).

FUNCTIONS:
Gray composite construction

CONSISTS OF:
One 6x5.5E Thin Electric Propeller

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 6"
Pitch: 5.5
Center inner diameter: 0.25"

The below product also sets truly well with the product being talked about.



These are the ElectriFly Prop Saver O-rings from Excellent Planes.

FEATURES:
Twists around the prop to hold it on and safeguard it throughout crashes

CONSISTS OF:
Five prop saver O-rings

REQUIRES:
Setup

Several others have purchased this product together with the product that you are currently checking out.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Requirements:
Dimension : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with accessories)

Want another excellent product to match the above pointed out product?

8x3.8 Slow Flyer Propeller

This is a 8x3.8 Slo-Flyer "tractor" (not a "pusher") aircraft propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon construction minimizes rotating mass for
    greater output and longer life.
Reinforcing carbon fibers help preserve true, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring guideline sheet

REQUIRES:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 8"
Pitch: 3.8

COMMENTS:
Slo-Flyer props are Not designed for Glow engines