Traxxas Servo Digital Hightorque Bb Wa

This is the Digital High Torque Servo for the Traxxas
E-Revo RTR and the Traxxas Slash

FEATURES:
Plastic blue 3 piece water resistant case

SUCHES AS:
One Digital High Torque Servo with J style connector

REQUIRES:
Installing into car

SPECS:
Length: 41mm (1.6")
Width: 20mm (0.79")
Height: 42.3mm (1.67")
Torque: 125 oz-in
Speed: 0.16 sec @ 60°

Several others have actually acquired this thing in addition to the thing that you are presently reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly like this thing if you have the thing just above pointed out.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

SUCHES AS:
2 Ball Bearings

REQUIRES:
Assembly to car

SPECS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Primary Clutch (one needed).

Want another fantastic thing to compliment the above stated thing?

Antenna Tube W/ Cap, Black

This is a basic replacement Antenna Tube with Cap from Dubro
This product can be utilized anywhere an antenna tube is had to support
a receiver antenna wire.

FEATURES:
Black plastic building

SUCHES AS:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

REQUIRES:
Absolutely nothing. This is a direct fit part for any boat, vehicle, etc. that uses
    a basic size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Diameter: 1/8" (3.2mm)

Want another fantastic thing to compliment the above stated thing?

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building

SUCHES AS:
2 hex centers
4 axle pins

REQUIRES:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

COMMENTS:
These centers could be utilized with other vehicles using the exact same
    pin/hex design. These centers Will Not deal with the T-Maxx or E-Maxx.