Traxxas Servo Gear Set #2070/2075

This is the replacement Equipment Set for the 2070 & 2075 Servo.

FEATURES:
Total gear set for the Traxxas 2070 (TRAM2070) or 2075 servo

INCLUDES:
Four servo equipments and bearings and direction sheet

REQUIRES:
Installation on the 2070 or 2075 Traxxas servo

The below product additionally sets really well with the product being talked about.

Universal Servo Grease

This is for use with all makers' servo gear sets.
To use, just take apart servo, throughly clean all old grease off equipments, and
use brand-new grease moderately throughout reassembly.
The grease (.1 oz) comes in a little toothpaste-like metal tube.

DEE
8.Oct.97

Often gotten with the product that you are presently reading about.

Large Servo Saver

This is a large servo saver that can be utilized in Traxxas vehicles or any car that
requires a large style servo saver.
FEATURES:
Difficult white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that permit you to install the saver
on many popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also included is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for mounting the guiding linkages.

Get this product to boost the one you are reading around.

Main Chassis (S)

This is the replacement chassis for the Traxxas Stampede truck. It is made
of black, enhanced nylon and is a channel-style chassis.

PACKAGE
INCLUDES: One chassis

REMARKS:
The skid plates are not included, use TRAC9023.

Below is a fantastic product that many others have actually purchased the same time.

Skid Plates Front & Rear (S)

This is a replacement set of skid plates for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Length of front plate: 5 5/8"
Thickness of front plate: 3/16"
Width of front plate: 2 1/8"
Length of rear plate: 4 3/8"
Thickness of rear plate: 1/8"
Width of rear plate: 2 1/8"

INCLUDES:
(1) Front skid plate
(1) Rear skid plate
MDJ 3/25/95 ¦-)

Often gotten with the product that you are presently reading about.

Box, Receiver For Stmpd, Rstlr, Bandt

This is the Receiver Box for use on the
Traxxas Stampede, Rustler, and Bandit Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Receiver Box
One Rubber Seal
Foam Padding
2 2.5x8mm Cap Head Screws
2 3x10mm Cap Head Screws
2 2.5x10mm Cap Head Screws
One Tube of Grease
Instruction sheet

REQUIRES:
Installation on the car

SPECS:
Length: 78mm (3.07")
Width: 35mm (1.4")
Height: 33mm (1.3")

Many others have actually gotten this product along with the product that you are presently reading about.

Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic building and construction
Black in color

INCLUDES:
One left caster block
One right caster block

REQUIRES:
Installation on Slash

SPECS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

This product is regularly gotten with the above pointed out product.

Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic building and construction
Black in color

INCLUDES:
2 steering blocks

REQUIRES:
Installation on guiding assembly

SPECS:
Length: 35mm (1.38")
Width: 32mm (1.26")