Traxxas Chassis, E-Maxx (Long Wheelbas

This is the Long Wheelbase Chassis for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, gray in color
Replaces worn or broken chassis

INCLUDES:
One long wheelbase chassis

REQUIRES:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 11.5" (292.1mm)
Width: 6.5" (165.1mm)

This product praises the above gone over product.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black in color
Replaces worn or harmed lower chassis braces

INCLUDES:
Right and left lower chassis braces

REQUIRES:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Density: .43" (11mm)

Here is an additional product that praises the product being gone over.

Skid Plate Gray E-Maxx

This is the Transmission Skid Plate
for the Traxxas E-Maxx.

FUNCTIONS:
Gray nylon building

INCLUDES:
One nylon transmission skid plate

REQUIRES:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 4.60" (117mm)
Width: 2.40" (61mm)

This product praises the main item below.

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Beast Truck.
This skidplate bolts to the Chassis (vital #4922) and the Bulkheads vital #4930
and provides security to the front differential.

FEATURES:
Skidplate is constructed of high effect formed black plastic.
Front of skidplate kicks up at about 45 degrees to shield the
    differential from crash damage or difficult landings from jumps.
Stainless steel installing plate provides rigid installing surface.

INCLUDES:
One plastic front skidplate
One stainless-steel installing plate.

REQUIRES:
Setting up on chassis with 4 3x10mm countersunk machine screws
    (not consisted of, utilize TRAC3277).

Regularly bought with the product that you are currently checking out.

3 X 12Mm Cntrsnk Machine Screw (6)

This is a plan of six 3x12mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo beast truck, can likewise be used in any
    application where a 3x12mm countersunk screw is required

INCLUDES:
Six 3x12mm Traxxas Countersunk Hex Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 12mm
Size: 3mm

Want an additional fantastic product to match the above mentioned product?



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Perfect upgrade for radios discovered in RTR vehicles
Throttle and steering trim and reverse
Steering dual rate dial
Throttle end point modification
Channel 3 switch
Throttle fail safe
One year restricted warranty through Pastime Services starting at date
    of purchase

INCLUDES:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Guideline
    Manual and On/Off Switch

REQUIRES:
Servos of modeler's choice
4 AA batteries for transmitter

SPECIFICATIONS:
Transmitter:
Transferring Frequency: 2.4GHz band
Power Requirement: 4 AA cells
Existing Drain: 100mA or less

    Receiver;
Measurements: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shared with servo)
Battery Fail Safe Voltage: 3.8V*
Existing Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work appropriately when other kind of battery is used

REMARKS:
2.4GHz FHSS is not compatible with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
kind of servos or peripherals.
High-Speed mode (in 4PL tx just), with an output of 6.8ms accepts
    digital servos consisting of the BLS series and most peripheral
    devices such as brushless ESCs