Traxxas Skid Plate Gray E-Maxx

This is the Transmission Skid Plate
for the Traxxas E-Maxx.

FEATURES:
Gray nylon building

CONSISTS OF:
One nylon transmission skid plate

NEEDS:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 4.60" (117mm)
Width: 2.40" (61mm)

This product is frequently bought with the above mentioned product.

Chassis, E-Maxx (Long Wheelbas

This is the Long Wheelbase Chassis for the Traxxas E-Maxx.

FEATURES:
Nylon building, gray in color
Changes worn or broken chassis

CONSISTS OF:
One long wheelbase chassis

NEEDS:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 11.5" (292.1mm)
Width: 6.5" (165.1mm)

Lots of others have actually bought this product in addition to the product that you are currently reviewing.

Box, Receiver Sealed W/Silicon

This is the Receiver Box for the Traxxas E-Maxx Truck.

FEATURES:
Changes broken receiver boxes
Constructed of black plastic

CONSISTS OF:
One top and bottom half receiver box for the Traxxas E-Maxx
Hardware

NEEDS:
Installing receiver and bolting receiver box to chassis.

This is a superb enhancement to the product currently being talked about.

Motor Plate For Single Motor

This is the optional Single Motor Plate for the
Traxxas E-Maxx 16.8V RTR.

FEATURES:
Aluminum building, blue in color
Designed for a clean install of a single brushless motor system in
the E-Maxx 16.8V RTR (requires gear cover number TRAC3997)

CONSISTS OF:
One Aluminum Motor Plate

NEEDS:
Setup and motor cover number TRAC3997

Right here is another product that praises the product being talked about.

3 X 8Mm Counter Hex Screw (6)

These are 3x8mm Countersunk Hex Head Screws by Traxxas.
Can be used anywhere this type of screw is needed.

FEATURES:
Metal Construction
Black in Color
Countersunk

CONSISTS OF:
(6) Screws

SPECIFICATIONS:
Length: 8mm
Diameter: 3mm

Right here is another product that praises the product being talked about.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
Changes worn or damaged lower chassis braces

CONSISTS OF:
Right and left lower chassis braces

NEEDS:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Thickness: .43" (11mm)