Dubro E-Z Connector For Rod Or Cable

This is an EZ Connector set by Dubro.
EZ Connectors link a pushrod to a servo arm permitting it to pivot for
less going in control surfaces.

FEATURES:
Works on 2-56 and smaller sized wire (.078")
Irreversible or snap on installing push nuts both included.

INCLUDES:
Two brass EZ Connectors
Two plastic snap nuts.
Two metal snap nuts.
Two 2.5x3.5mm slotted head screws.

REQUIRES:
Assembly onto linkages

SPECS:
Length of brass connector: 10mm (.395")
Size of brass connector: 5.5mm (.217")

Right here is a wonderful item that many others have bought at the exact same time.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

INCLUDES:
Two control horns w/4 changing holes and 2 installing holes
(3/4" long [tall])
Two installing plates w/2 installing holes (3/8"x3/8")
4 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECS:
See "consists of" above

Many others have purchased this item along with the item that you are presently checking out.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Equipment Type : All Nylon Equipment
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Requirements:
Measurement : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with devices)

Want an additional wonderful item to enhance the above stated item?

Mini E/Z Connector 2/Pkg

These are Mini E-Z Connectors for Park Flyers by Dubro.

FEATURES:
Aluminum Building

INCLUDES:
Two Connectors
Two Screws
Two Washers

REQUIRES:
Absolutely nothing

SPECS:
Length: 4.8mm (3/16")
Size: 3.2mm (1/8")
Weight: 0.25g (0.0088oz)

COMMENTS:
Maximum pushrod diameter is .047 - 3/64" (1.22mm)

Right here is a wonderful item that many others have bought at the exact same time.

300Mm Light Extension Cable (Jr)

HYPERION 300MM LIGHT EXTENSION CABLE (JR)

Right here is a wonderful item that many others have bought at the exact same time.



This item is frequently purchased with the above stated item.

Gold Plated Bullet Connector Female 3.5mm (3)

Created for use with 3 wire Brushless motor systems, this is
the 3.5mm Gold Bullet Connector Female from Fantastic Planes.

FEATURES:
Gold plated
Fits wire diameter approximately 3.5mm

INCLUDES:
3 female bullet adapters

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .51" (13mm)
Size: .14" (3.5mm) inside (where the wire is soldered to)
Size: .17" (4.25mm) outside

COMMENTS:
For the 3.5mm male connector order GPMM3112

Right here is a wonderful item that many others have bought at the exact same time.

Nylon Kwik-Link On 12" 2-56 Rod (5/Pkg)

These are Threaded Rods with Nylon Kwik Links.

FEATURES:
Steel rod building w/ 2-56 threads
Nylon clevis building

INCLUDES:
5 steel threaded rods 12" long, thread length 3/4", .072" diameter
5 2-56 nylon clevises 7/8" long

SPECS:
See "Includes" above

COMMENTS:
For bulk qty of 12, use DUBQ1580.

Many others have purchased this item along with the item that you are presently checking out.

12" Rods With St Kwik Link

These are Threaded Rods with Kwik Links.

FEATURES:
Steel building

INCLUDES:
5 steel threaded rods 12" long, thread length 3/4", .072" diameter
5 2-56 steel clevises 1" long

SPECS:
See "Includes" above

COMMENTS:
For bulk qty of 12, utilize DUBQ1550.