Hyperion 300Mm Light Extension Cable (Jr)

HYPERION 300MM LIGHT EXTENSION CABLE TELEVISION (JR)

Lots of others have gotten this product in addition to the product that you are currently reading about.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Equipment Type : All Nylon Equipment
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Requirements:
Dimension : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with devices)

The below product also sets truly well with the product being talked about.

450mm Standard Extension Cable (JR)

HYPERION 450MM REQUIREMENT EXTENSION CABLE TELEVISION (JR)

Below is a excellent product that numerous others have bought at the same time.

Box, Reciever (Sealed)/ Foam Pads/ 2.5X12mm Cs (2)/ 3X6mm Cs (2)

This is the Receiver Box for the 1/10 scale Traxxas Rally Race Car.

FEATURES:
Plastic building, black in color

CONSISTS OF:
Upper and lower Case Halves with Wire Cover
Gasket
2 Foam Pads
2 3x12mm Button Head Cap Screws
2 3x6mm Button Head Cap Screws
2 2.5x12mm Cap Screws
Instruction Sheet

SPECIFICATIONS:
Box Dimensions: 1.6 x 1.7 x 2.1" (41 x 43 x 54.5mm)

You will like this product if you have the product previously mentioned.

E-Z Connector For Rod Or Cable

This is an EZ Connector set by Dubro.
EZ Connectors connect a pushrod to a servo arm enabling it to pivot for
less going in control surfaces.

FEATURES:
Functions on 2-56 and smaller wire (.078")
Permanent or snap on installing push nuts both included.

INCLUDES:
2 brass EZ Connectors
2 plastic snap nuts.
Two metal snap nuts.
Two 2.5x3.5mm slotted head screws.

REQUIRES:
Assembly onto linkages

SPECIFICATIONS:
Length of brass connector: 10mm (.395")
Diameter of brass connector: 5.5mm (.217")