Dubro Nylon Kwik-Link On 12" 2-56 Rod (5/Pkg)

These are Threaded Rods with Nylon Kwik Links.

FEATURES:
Steel rod building and construction w/ 2-56 threads
Nylon clevis building and construction

CONSISTS OF:
Five steel threaded rods 12" long, thread length 3/4", .072" size
Five 2-56 nylon clevises 7/8" long

SPECIFICATIONS:
See "Includes" above

COMMENTS:
For bulk qty of 12, use DUBQ1580.

Numerous others have actually purchased this item together with the item that you are presently reading about.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building and construction

CONSISTS OF:
Two control horns w/4 changing holes and 2 mounting holes
(3/4" long [high])
Two mounting plates w/2 mounting holes (3/8"x3/8")
4 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "consists of" above

The listed below item additionally pairs truly well with the item being reviewed.

6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft just (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 2 adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Two composite adapter rings
One direction sheet

NEEDS:
Assembly onto motor or gear drive unit in your Electric plane.
Balancing

SPECIFICATIONS:
Diameter: 6"
Pitch: 4
Hub inner size: 0.25"

COMMENTS:
Usage Speed 400 Electric motors.

This is a superb enhancement to the item presently being reviewed.

T-Style Nylon Control Horns 2Pc

These are T-Style Nylon Control Horns.

FEATURES:
Nylon building and construction

CONSISTS OF:
Two control horns w/5 changing holes and 2 mounting holes
(1-1/8" long [high])
Two mounting plates w/2 mounting holes (1/2"x1/2")
4 2-56x5/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "consists of" above

This item praises the main item below.

7x5 Thin Electric Prop

This is a 7x5E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft just (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 2 adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Two composite adapter rings
One direction sheet

NEEDS:
ALL props require balancing, this is VERY important, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 7"
Pitch: 5
Hub inner size: 0.25"

Get this item to boost the one you read around.

7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Precision Composites.
For use on electric powered aircraft just (not for radiance engines).

FUNCTIONS:
Gray composite building and construction
Features 2 adjuster rings that adapt to various motor shafts

CONSISTS OF:
One 7x6EP Thin Electric Propeller

NEEDS:
ALL props require balancing, this is VERY important, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 7"
Pitch: 6
Hub inner size: 0.25" (6.3mm)