Great Planes Gold Plated Bullet Connector Female 3.5mm (3)

Developed for use with 3 wire Brushless motor systems, this is
the 3.5mm Gold Bullet Port Female from Fantastic Planes.

FEATURES:
Gold plated
Fits wire diameter approximately 3.5mm

CONSISTS OF:
3 female bullet connectors

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .51" (13mm)
Diameter: .14" (3.5mm) inside (where the wire is soldered to)
Diameter: .17" (4.25mm) outside

REMARKS:
For the 3.5mm male port order GPMM3112

Right here is an additional thing that compliments the thing being discussed.



Developed for use with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Port Male from Great Planes.

FEATURES:
Gold plated

CONSISTS OF:
3 male bullet connectors

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .47" (12mm)
Diameter: .14" (3.5mm) outside

REMARKS:
For the 3.5mm female port order GPMM3113

Want an additional fantastic thing to enhance the above stated thing?



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is perfect for all electronic applications.

Frequently acquired with the thing that you are presently reviewing.

Heat Shrink Tubing Set, 3/16" (4.7Mm) 8/Pkg

This is a set of 3/16" Diameter Heat Shrink Tubing from Dubro.

FEATURES:
Developed to diminish approximately 1/2 of its initial size
Perfect for insulating electrical splices, covering electrical plugs
    and connectors

CONSISTS OF:
Four pieces of red heat diminish tubing
Four pieces of black heat diminish tubing

REQUIRES:
Shrink tubing on all sides with heat gun, butane lighter or soldering
    iron

SPECS:
Diameter: 3/16" (4.5mm)
Length: 1-1/2" (38mm)

REMARKS:
Use a tubing size that disappears than two times the diameter of the
    item being covered.

Get this thing to improve the one you read around.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design gets rid of the possiblility of reverse polarity
connections
Supplies a safe connection for battery and motor connections

CONSISTS OF:
Two 2-Pin Male Ultra Plug
Four short pieces of Black diminish tubing

REQUIRES:
Soldering to wire
Soldering Iron, HCAR0775

REMARKS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

Get this thing to improve the one you read around.



This is 16AWG Red and Black Ultra Wire from Dean's.

FUNCTIONS:
16 gauge
660 hairs of pure copper pre-tinned for simple soldering
Deterioration resistance
Highest grade of copper and pure silicone insulation supply maximum
    power and simple soldering

CONSISTS OF:
One red 2' length of ultra wire
One black 2' length of ultra wire

REQUIRES:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

SPECS:
Length: 2' (61cm)

The listed below thing likewise pairs really well with the thing being discussed.



This is a High Grade, 12 gauge Wire Useable In R/C Products To Carry High
Currents of Electricity.

FEATURES:
12 gauge Wire Has Less Voltage Drop, Due To Less Resistance.
Very Flexible
Wire Made from Copper

CONSISTS OF:
One 2' red (+) wire
One 2' black (-) wire