Castle Creations Talon 15, 15Amp, 4S Max, Heavy Duty Bec

This is the Talon 15 Mini ESC from Castle Creations.

FEATURES:
Developed for use in electrical RC helis or planes pulling up to
    15 amps
8amp peak, 3amp continuous BEC handles high drain servos
Castle Link suitable, Portable Developer Air Card offered independently-
    CSEM6301
One year minimal guarantee through Castle Creations starting at date
    of purchase

INCLUDES:
Talon 15 Mini ESC with Receiver Connector and Instructions

REQUIRES:
Motor connectors of modeler's choice
Soldering iron for attaching connectors

SPECIFICATIONS:
Input Voltage: 2-4S LiPo
Max Continuous Amperage: 15A (at full throttle)
BEC Voltage: 5.5V
BEC Output Amperage: 8 amp peak, 3 amp continuous
Measurements: 0.58 x 1.10 x 0.32" (14.7 x 27.9mm x 8.1mm)
Weight with Wires: 0.25oz (7.2g)
Weight without Wires: 0.12oz (3.4g)

Numerous others have purchased this thing in addition to the thing that you are presently checking out.

1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Suitable for indoor 3D Flight, 220g and under, with 10A speed controller or little Multi-Rotor frames with Hobbywing 6A esc.

An outstanding motor for airplanes approximately 220 grams (8 oz) utilizing 2 li-poly cells. Extremely lightweight at 19 grams consisting of essential prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and essential firewall program install. Great for little 3D airplanes weighing around 6 oz, or aerobatic airplanes approximately 8 oz. Usage with a 10 Amp brushless ESC and little 7.4V lithium batteries in the 400mah - 800mah range.

The motor includes a 3mm hardened steel shaft, double ball bearings, essential prop saver for APC E props and essential firewall program install flange. Note that the prop saver is sized for APC props. GWS props will require some modification to fit correctly. Countersunk installing holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. efficiency current: 2-6 Amp
NoLoad current / 0.3 Amp
Existing capacity: 7.5 A/60 s
Max. Effectiveness: 74%
Weight with cables: 19g
Measurements (mm): 27.6x11.5

Recomended design weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5