Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides secure connnection for light duty applications such as mini
    cars and Park Flyers.

INCLUDES:
Two plugs with diminish wrap

REQUIRES:
Soldering leads onto the connectors

SPECS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This item is frequently bought with the above mentioned item.



This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

INCLUDES:
One male-male port (pins on both sides)
One male-female port (pins on one side)
Two pieces of little Red heat-shrinkable tubing
Two pieces of little Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECS:
Overall length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, six locations: .181" (4.6mm)
Width between pins: .058" (1.4mm)

REMARKS:
The port is NOT compatible with little White
    Futaba transmitter battery connectors.

The below item also pairs actually well with the item being talked about.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise known as a JST connector.

FEATURES:
Created for usage with a lot of Park Flyer ElectriFly electronic devices
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality warranty

INCLUDES:
Two Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 13mm (overall with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female connectors with wire, usage GPMM3107
This port can be used to change BEC-type connectors.

This item compliments the main item right here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors offer less resistance
Lightweight
Enables existing to move very fast
Permits more power

INCLUDES:
Two 2B Micro Plugs with 4 areas of diminish wrap

REQUIRES:
Soldering wires to plugs, can use HCAR0775-soldering iron

Regularly bought with the item that you are currently reading about.



This is the Great Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing allows all cells to totally Credit 4.2V making sure
    optimum power from the pack, plus conditions the cells much better
    so they will last longer
Safer as long as the Cell Balancer or a correctly equipped Battery charger
    with Stabilizing Abilities is used

INCLUDES:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Direction Sheet

REQUIRES:
2S 7.4V AC/DC Micro LiPo Balancing Battery charger with Air Conditioning and DC Adapters
    (GPMM3321), or with Balancing Battery charger with Automobile Adapter only
    (GPMM3322)

SPECS:
Capacity: 250mAh
Variety of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A optimum)
Maximum Recommended Charging Amps: 0.3A
Pack Measurements: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
READ the ENTIRE direction sheet consisted of with battery prior to usage
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER dismantle or customize pack circuitry in any method or leak cells
NEVER place on flammable products or leave unattended throughout
    Charging
ALWAYS charge in a fire-resistant location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children