Traxxas Transmitter Antenna

TRAXXAS
RADIO ACCESSORIES Traxxas replacement and optional parts are
available for your radio system. below for stock numbers, descriptions,
and prices. See the ""Intro to Radios'' information fo an
description of the uses for these items.

This product is regularly acquired with the above pointed out product.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with ports

REQUIRES:
Setting up in car

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

Here is a wonderful product that numerous others have bought at the very same time.



This is the Traxxas Male Adapter to Molex Female Adapter Adapter.

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it difficult to link in reverse
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Secure, positive locking spring crammed terminals for consistent
    contact
Numerous locking barbs keep terminals protect

INCLUDES:
One Traxxas male adapter to Molex female connector adapter

REMARKS:
Molex adapter not suitable for high present use

This product compliments the main item here.



This is the Traxxas Female Adapter to Molex Male Adapter Adapter.

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it difficult to link in reverse
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Secure, positive locking spring crammed terminals for consistent
    contact
Numerous locking barbs keep terminals protect

INCLUDES:
One Traxxas female adapter to Molex male connector adapter

REMARKS:
Molex adapter not suitable for high present use

This is a superb enhancement to the product presently being reviewed.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at rear of chassis to avoid car from turning over
    throughout wheelies

INCLUDES:
Assembled optional Wheelie Bar with installing instructions and
    hardware

REQUIRES:
Attaching to rear of chassis

Here is a wonderful product that numerous others have bought at the very same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two Front bearing (hub) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if required use (2) DTXC1547.

Lots of others have acquired this product in addition to the product that you are presently reviewing.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for use in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programming capability through Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for use in nearly every environment (not intended for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces lots of stock brushed motors
Four magnet, 4 pole rotor for higher torque
1.4" size slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Switch, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery adapter of modeler's choice

SPECS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)