Traxxas Transmitter Antenna

TRAXXAS
RADIO ACCESSORIES Traxxas replacement and optional parts are
readily available for your radio system. below for stock numbers, descriptions,
and costs. See the ""Intro to Radios'' details fo an
explanation of the usages for these products.

This product is often acquired with the above discussed product.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

INCLUDES:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with adapters

REQUIRES:
Setting up in automobile

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specifications such as RPM are not provided

Here is a wonderful product that lots of others have purchased the same time.



This is the Traxxas Male Adapter to Molex Female Adapter Adapter.

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it difficult to connect backwards
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protect, favorable locking spring loaded terminals for consistent
    contact
Multiple locking barbs keep terminals protect

INCLUDES:
One Traxxas male adapter to Molex female port adapter

COMMENTS:
Molex adapter not ideal for high current use

This product praises the main item right here.



This is the Traxxas Female Adapter to Molex Male Adapter Adapter.

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it difficult to connect backwards
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protect, favorable locking spring loaded terminals for consistent
    contact
Multiple locking barbs keep terminals protect

INCLUDES:
One Traxxas female adapter to Molex male port adapter

COMMENTS:
Molex adapter not ideal for high current use

This is a great addition to the product currently being gone over.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at rear of chassis to avoid automobile from turning over
    during wheelies

INCLUDES:
Put together optional Wheelie Bar with installing guidelines and
    hardware

REQUIRES:
Fastening to rear of chassis

Here is a wonderful product that lots of others have purchased the same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 Front bearing (center) carriers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Numerous others have acquired this product in addition to the product that you are currently reading about.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in much heavier
    cars such as E-Revos or E-Maxx class cars)
USB shows capability by means of Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for use in nearly every environment (not planned for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces lots of stock brushed motors
4 magnet, 4 pole rotor for higher torque
1.4" size slotted stator
Easily removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Change, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery adapter of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)