Traxxas Toe Link 5.0Mm Steel Frnt Or Rr (2) Revo

This is a set of replacement Toe Links for the Traxxas Revo Truck.
    These change the position of the toe on the vehicle.

FEATURES:
Steel turnbuckle design
5.0mm diameter

INCLUDES:
Two front or rear toe links

REQUIRES:
Nothing. These are direct replacement parts.

SPECS:
Length: 5.1" (129mm)

This thing praises the above reviewed thing.

Rod Ends Revo Large W/ Hollow Balls

This is the Large Rod End Set for the Traxxas Revo.

FEATURES:
Plastic construction
Black in color
Metal Pivot Balls

INCLUDES:
12 Rod Ends
12 Pivot Balls

REQUIRES:
Assembly to car

SPECS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Get this thing to boost the one you are reading about.

Push Rod Assmbld W/Rod Ends (2) For Use W/# 5357 Revo

This is the set of Steel Pushrods for the Traxxas Revo.

FEATURES:
Metal pushrod construction
Plastic rod ends with hollow ball ends

INCLUDES:
(2) pushrods
(4) rod ends
(4) hollow ball ends

REQUIRES:
Installation on a Traxxas Revo

SPECS:
Pushrod length end-to-end: 4-1/16" (102mm)
Pushrod length in between threads: 3-1/4" ( 81mm)
Diameter of unthreaded area: 3/16" ( 5mm)

REMARKS:
These pushrods work with the long travel #5356, TRAC5356, or
progressive rocker 1 #5357, TRAC5357, arm sets.

Want an additional wonderful thing to compliment the above stated thing?

Push Rod Assmbld W/Rod Ends (2) For Use W/#5359 Revo

These are the (optional) Steel Pushrods for the Rocker Arms
for the REVO from Traxxas
These go in between the Rocker Arms and the Lower Suspension Arms

FEATURES:
Black steel construction

INCLUDES:
Two Pushrods w/pre-installed rod ends and balls

REQUIRES:
Installing on the car

SPECS:
Length: 5.4" (137mm) end to end including rod ends
Diameter: 0.20" (5mm)

REMARKS:
For rod ends just use TRAC5347

This thing praises the main item below.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building and construction
Blue and Black in Color

INCLUDES:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Direction sheet

REQUIRES:
Two plans required to complete truck

Get this thing to boost the one you are reading about.



Features
Suitable for high-stress 1/4 scale/giant scale designs
strong and durable

Specs
Linkages: Control Horns
Material : Metal
Thread Size: 8-32

The below thing likewise sets truly well with the thing being reviewed.

Titanium Pro-Links 4-40x4-1/2" (2)

Specs
Hardware: Turnbuckles/Pro-Links
Hardware Length : 2" - 5"
Material : Metal
Thread Size: 4-40