Traxxas Spring Shock White GTR Long 0.892 Blue (2)

This is the set of Traxxas Long GTR Shock Springs
with 0.892 Blue Compression Rate.

FEATURES:
Steel building, white in color
Dab of paint on end of spring suggests compression rate

CONSISTS OF:
Two Long 0.892 Blue Rate GTR Shock Springs

SPECS:
Length: 1.8" (45mm)
Wire Size: 0.043" (1.1mm)

Many others have acquired this product in addition to the product that you are presently reading about.

Spring Shock White Gtr Xxlong 1.004 Rate Blue (1 Pair)

This is the set of Traxxas Extra Extra Long GTR Shock Springs
with 1.004 Blue Compression Rate.

FEATURES:
Steel building, white in color
Dab of paint on end of spring suggests compression rate

CONSISTS OF:
Two Extra Extra Long 1.004 Blue Rate GTR Shock Springs

SPECS:
Length: 2.2" (56mm)
Wire Size: 0.043" (1.1mm)

You will enjoy this item if you have the item just above mentioned.

Shocks, Gtr Long Hard-Anodized, Ptfe-Coated Bodies With Tin Shaf

This is a pair of Long Traxxas GTR Shocks.

FEATURES:
Tough anodized PTFE aluminum bodies
TiN layered shafts

CONSISTS OF:
Two Long Traxxas GTR Shocks
Bottle of Silicone Shock Oil

REQUIRES:
Springs of modeler's choice

SPECS:
Length: 3.3" (84mm) from upper and lower mounting hole centers

Get this product to enhance the one you are reading about.

Shocks, Gtr Xx-Long Hard Anodized, Ptfe Coated Bodies W/ Tin Sha

This is a pair of XX-Long Traxxas GTR Shocks.

FEATURES:
Tough anodized PTFE aluminum bodies
TiN layered shafts

CONSISTS OF:
Two XX-Long Traxxas GTR Shocks
Bottle of Silicone Shock Oil

REQUIRES:
Springs of modeler's choice

SPECS:
Length: 3.9" (100.5mm) from upper and lower mounting hole centers

The below product also pairs actually well with the product being discussed.

Motor Heat Sink

This is the original replacement motor heatsink for the Traxxas Villain IV.
AXY
4/8/92

You will enjoy this item if you have the item just above mentioned.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Many others have acquired this product in addition to the product that you are presently reading about.

Suspension Arms Guards Front Stampede 4X4

These are the Front Suspension Arm Guards for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite plastic building
Black in color

CONSISTS OF:
Two front suspension arm guards
Two guard spacers
Two hollow balls
Eight 3x16mm button head cap screws

REQUIRES:
Setup onto front suspension