Traxxas Cone Split Beveled

Replacement SPLIT BEVEL CONE for the Traxxas Nitro Vee Boat. This cone is
part of the engine assembly. (Image .12)

PLAN
INCLUDES:
1-Beveled Cone

FEATURES:
Black steel construction
Beveled cone shape with split on one side

REMARKS:
Beveled cone beings in front of the flywheel
7/19/94sk

Many others have actually bought this product together with the product that you are presently reading about.

3 X 10 Mm Cst Screws (6)

These are 3x10mm Countersunk Self-Tapping Screws from Traxxas.

FEATURES:
Steel construction
Phillips drive insert
Countersunk and self-tapping
Replacement parts designed for the Traxxas Nitro Hawk

INCLUDES:
(6) Screws

SPECIFICATIONS:
Size: 3mm
Length: 10mm

Many others have actually bought this product together with the product that you are presently reading about.

3 X 10 Mm Csm Screws (6)

This is a set of 3x10mm Countersunk machine screws for the Traxxas Nitro Hawk.

FEATURES:
Metal construction
Countersunk (flat head) machine screws
Phillips drive insert
Replacement parts designed for the Traxxas Nitro Hawk

INCLUDES:
6 Screws

SPECIFICATIONS:
Length: 10mm
Size: 3mm

Below is a excellent product that lots of others have actually purchased the exact same time.

Ball Bearing 5 X 11Mm (2)

These are 5 x 11 x 4mm Ball Bearings from Traxxas.

FEATURES:
Ball bearings minimize friction and last longer than bushings.
Chrome steel construction.
Used to update from bushings.

INCLUDES:
Two 5 x 11mm bearings

SPECIFICATIONS:
Inner Size: 5mm
Outer Size: 11mm
Thickness: 4mm

REMARKS:
To clean bearings utilize DTXC2458 Power Shot Cleaner

The below product also pairs really well with the product being reviewed.

3.3 Engine Ips Shaft W/Pull Start

This is the Traxxas TRX 3.3 Racing Engine with Pull Starter.

FEATURES:
For usage in all Traxxas TRX2.5 and TRX 3.3 equipped automobiles
Pull starter can be gotten rid of to set up the EZ Start
60% more peak power than the TRX2.5, with almost 50% more power
    under the curve for strong linear acceleration
Round rear exhaust with one-piece IPS crankshaft
Composite body slide valve carburetor with high-volume air filter
Blue anodized aluminum cooling head with molded head protector

INCLUDES:
Traxxas TRX 3.3 Racing Engine with Pull Beginner and radiance plug
One instruction manual (TRAZ5300)
One service support guide and parts lis.
One set of engine decals
One engine burglary DVD
One small bottle of air filter oil
One air filter

REQUIRES:
Automobile fuel with 10%, 20% or 33% nitro material

SPECIFICATIONS:
Displacement: .20 cu in (3.3cc)
Practical RPM: N/A
Output: N/A
Weight: 10.9oz (305g)
Distance in between mounting holes very same side: 0.39" (10mm)
Distance in between mounting holes opposite side: 1.2" (32mm)
Distance from center of engine to front bearing: 1.2" (32mm)
Distance/bottom of mounting flanges/top of cylinder head: 3.5" (88mm
Width of mounting flanges: 44mm

REMARKS:
Other variations of the TRX 3.3 engine consist of;
    #5404 Single Shaft without Beginner, TRAG5404
    #5406 Multi-Shaft without Beginner, TRAG5406
    #5409 Multi-Shaft w/Recoil Pull Beginner, TRAG5409