Traxxas 5 X 10 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X10mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X10mm ball bearings, Part #5115

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 3/8" (10mm)
Width: 5/32" (4mm)

The listed below product likewise pairs actually well with the product being gone over.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

INCLUDES:
Two Ball Bearings

REQUIRES:
Assembly to automobile

SPECIFICATIONS:
Inner Size: 10mm
Outer Size: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are utilized to support the Primary Clutch (one required).

Frequently gotten with the product that you are currently reading about.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Only (No Wires).

FUNCTIONS:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity security makes it difficult to connect in reverse
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Protect, favorable locking spring loaded terminals for consistent
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
One black female plastic adapter
One black male plastic adapter
Two sets of gold metal pins
Instruction sheet

REQUIRES:
Soldering wires to the metal pins

Get this product to boost the one you read around.

Ptfe (Teflon) Clutch Shoe And Spring Set, (3Pcs), Savage X

This is the Clutch Shoe and Spring Set for the HPI Savage .25
The shoes install to the flywheel and the springs hold on the shoes.

FEATURES:
Nylon building
Black in color
Metal black springs

INCLUDES:
3 nylon clutch shoes
3 black metal clutch springs

REQUIRES:
Assembly onto automobile

Here is a great product that many others have purchased the very same time.

4.0Mm X 14 Socket Head Cap Screws, 4/Pkg

These are Socket Head Cap Screws by Dubro

FUNCTIONS:
Black metal building

INCLUDES:
Four 4.0x14mm screws

REQUIRES:
2.5mm hex wrench, GPMR8012

This is a fantastic addition to the product currently being gone over.

2' Super Blue Silicone Tubing Medium (3/32" Id)

This Is 2 Feet of Medium Super Blue Silicone Tubing from Du-Bro.

FUNCTIONS:
For Glo-Fuel only.
Won't crack or harden.
Fits firmly on fuel fitting.
This is an excellent size for .10 thru .60 size engines.

INCLUDES:
2 Feet of Medium Super Blue Silicone Tubing

REQUIRES:
Fuel Fitting
Glo-Fuel

SPECIFICATIONS:
Inner Size: 3/32" (2.3mm)
Length: 2'

Want another great product to match the above pointed out product?



This is a set of 3.8" Pro-Line Beast Truck M2 Trencher Tires Mounted
on Desperado 1/2" Offset Black Wheels.

FEATURES:
Fits the front or rear of beast trucks with 17mm hex
Horizontal H-shaped tread nearly 1/4" (6.5mm) high for big quantities
    of forward bite with high degree of longevity and sturdiness
Increased sidewall density to resist tearing at the bead
M2 medium compound
1/2" offset wheel for Traxxas Summit fans or any beast trucks that
    requirement higher stability
Six-spoke nylon wheels, black in color

INCLUDES:
Two 3.8" M2 Trencher Tires and 2 Desperado 1/2" Offset Black Wheels

REQUIRES:
Mounting to automobile

SPECIFICATIONS:
Tires-
Size: 6.50" (165mm)
Width: 4.15" (105mm)
    Wheels-
Mounting Dia.: 3.82" (97mm)
Width: 2.75" (70mm)
Hex Size: 17mm
Offset: 1/2" (12.5mm)