Traxxas 17T Pinion Gear 32P

This is a 17 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached directly to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

INCLUDES:
One 17 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are utilized on the E-Maxx double motor
    set-up.

Often gotten with the thing that you are presently checking out.

15T Pinion Gear 32P

This is a 15 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached directly to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

INCLUDES:
One 15 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are utilized on the E-Maxx double motor
    set-up.

Get this thing to boost the one you read about.

19T Pinion Gear 32P

This is a 19 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached directly to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

INCLUDES:
One 19 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are utilized on the E-Maxx double motor
    set-up.

Below is another thing that praises the thing being talked about.

Drive Hub, Center, Rear (1)/ F

This is the Front and Rear Center Drive Hub Set for usage on the
Traxxas Slash 4x4 Vehicles.

FEATURES:
Nylon and steel building

INCLUDES:
One Front Center Drive Hub
One Rear Center Drive Hub
One Screw Pin

REQUIRES:
Installation in drive assembly

Lots of others have actually gotten this thing together with the thing that you are presently checking out.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo monster truck, can likewise be utilized in any
    application where a 3x15mm button head screw is needed

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Size: 3mm

This thing is frequently gotten with the above stated thing.

Horn Bracket 4-40 3/32"

These are 3/32" EZ Adjust Horn Brackets for 4-40 Threads

FUNCTIONS:
Nylon building

INCLUDES:
4 horn brackets

REQUIRES:
A rod with 4-40 threads

Below is a wonderful thing that several others have actually bought at the exact same time.



This is the Sidewinder SCT ESC and 3800kV Motor Combination from Castle Creations.

FEATURES:
Suitable for 2WD or 4WD brief course racing or yard bashing
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% higher power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link compatible (Field Link Portable Programmer Automobile Card
    (CSEM6300) needed, not included)
Proportional brake with reverse lockout
Waterproof*

INCLUDES:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Instructions

REQUIRES:
Battery adapter of modeler's choice

SPECS:
ESC
Input Voltage: Optimum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery adapter
    Motor:
Pole Count: 4
Stator Lamination Density: 0.0078" .2mm
Bearings: CNC rated Japanese bearings
Measurements: 1.4 x 2.1" (36 x 53mm)
Shaft Size: 1/8" (3.2mm)

COMMENTS:
*Not planned for operation while submerged in liquid. If device is
    operated in wet conditions, rinse with fresh water to get rid of dirt
    or corrosives, then completely dry unit.
Maximum advised car weight is 6.5pounds (2.95kg)