Traxxas 16T Pinion Gear 32P

This is a 16 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

INCLUDES:
One 16 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are utilized on the E-Maxx dual motor
    set-up.

The listed below product also sets truly well with the product being reviewed.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Gear
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon construction
Black in color
.8 Module pitch

INCLUDES:
One 54T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto car

This product is often bought with the above discussed product.

15T Pinion Gear 32P

This is a 15 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

INCLUDES:
One 15 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are utilized on the E-Maxx dual motor
    set-up.

Regularly bought with the product that you are presently reviewing.

17T Pinion Gear 32P

This is a 17 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

INCLUDES:
One 17 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are utilized on the E-Maxx dual motor
    set-up.

This is a fantastic enhancement to the product presently being reviewed.

18T Pinion Gear 32P

This is a 18 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

INCLUDES:
One 18 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are utilized on the E-Maxx dual motor
    set-up.

Here is one more product that compliments the product being reviewed.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs permit a wide array of bodies
    to be utilized consisting of rally automobile bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

INCLUDES:
Front and Rear Body Installs and Posts with Mounting Hardware

This product compliments the main item here.



This is the Sidewinder SCT ESC and 3800kV Motor Combination from Castle Creations.

FEATURES:
Perfect for 2WD or 4WD brief course racing or backyard slamming
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% higher power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link suitable (Field Link Portable Programmer Vehicle Card
    (CSEM6300) needed, not included)
Proportional brake with reverse lockout
Waterproof*

INCLUDES:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Directions

NEEDS:
Battery adapter of modeler's choice

SPECIFICATIONS:
ESC
Input Voltage: Optimum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery adapter
    Motor:
Pole Count: 4
Stator Lamination Thickness: 0.0078" .2mm
Bearings: CNC rated Japanese bearings
Dimensions: 1.4 x 2.1" (36 x 53mm)
Shaft Diameter: 1/8" (3.2mm)

REMARKS:
*Not intended for operation while immersed in liquid. If system is
    run in wet conditions, wash with fresh water to remove dirt
    or corrosives, then totally dry unit.
Maximum recommended car weight is 6.5pounds (2.95kg)