Traxxas 17T Pinion Gear 32P

This is a 17 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 17 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is just one of two which are utilized on the E-Maxx double motor
    set-up.

Regularly purchased with the product that you are currently checking out.

15T Pinion Gear 32P

This is a 15 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 15 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is just one of two which are utilized on the E-Maxx double motor
    set-up.

Get this product to enhance the one you read around.

19T Pinion Gear 32P

This is a 19 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 19 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is just one of two which are utilized on the E-Maxx double motor
    set-up.

Here is an additional product that praises the product being talked about.

Drive Hub, Center, Rear (1)/ F

This is the Front and Rear Center Drive Hub Set for use on the
Traxxas Slash 4x4 Vehicles.

FEATURES:
Nylon and steel building

CONSISTS OF:
One Front Center Drive Hub
One Rear Center Drive Hub
One Screw Pin

NEEDS:
Setup in drive assembly

Lots of others have actually purchased this product along with the product that you are currently checking out.

3 X 15Mm Button Hex Screw (6)

This is a package of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo monster truck, can likewise be utilized in any
    application where a 3x15mm button head screw is required

CONSISTS OF:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm

This product is regularly purchased with the above stated product.

Horn Bracket 4-40 3/32"

These are 3/32" EZ Change Horn Brackets for 4-40 Threads

FUNCTIONS:
Nylon building

CONSISTS OF:
Four horn brackets

NEEDS:
A rod with 4-40 threads

Here is a great product that several others have actually purchased the exact same time.



This is the Sidewinder SCT ESC and 3800kV Motor Combo from Castle Creations.

FEATURES:
Suitable for 2WD or 4WD brief course racing or yard slamming
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% greater power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link suitable (Field Link Portable Developer Vehicle Card
    (CSEM6300) required, not consisted of)
Proportional brake with reverse lockout
Water resistant*

CONSISTS OF:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Instructions

NEEDS:
Battery port of modeler's option

SPECIFICATIONS:
ESC
Input Voltage: Optimum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery port
    Motor:
Pole Count: 4
Stator Lamination Thickness: 0.0078" .2mm
Bearings: CNC rated Japanese bearings
Dimensions: 1.4 x 2.1" (36 x 53mm)
Shaft Size: 1/8" (3.2mm)

COMMENTS:
*Not intended for operation while submerged in liquid. If device is
    run in damp conditions, wash with fresh water to eliminate dirt
    or corrosives, then totally dry unit.
Maximum suggested vehicle weight is 6.5pounds (2.95kg)