JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

1/16 Summit VXL (Traxxas 72076-3 | TRA72076-3)

Model: Traxxas 72076-3
Dist. #: TRA72076-3   SKU: TRA72076-3

Be the first to review this product. (Write Review)

Out of stock

Price:  $369.95

This item will earn you 370 reward point(s).
370 points = $7.40 off your next order. Learn More

Updated on Nov 24, 2024 03:34:33 PM

1/16 Summit VXL TQ 2.4GHz TSM...
This is the brushless electric powered, 2.4GHz radio managed, ready to run
1/16 scale Traxxas Top VXL Beast Truck with Traxxas Stability Management.

**The consisted of TQ 2.4GHz radio system is compatible only with the**
**#6519 receiver and does DECLINE the Docking Base accessory.**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms work on
    high-speed electronic components to manage wheel spin and steering
    direction on loose dirt, concrete as well as ice and snow. TSM can be
    tweaked or shut off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Nylon composite building 0.08" (2mm) thick monocoque
    type
Drive: Four wheel
Radio: Traxxas TQ 2.4GHz high output with Traxxas Link automated
    design recognition, and water resistant micro steering servo
Electronic Speed Control: Traxxas VXL-3m water resistant, with high-
    existing adapter, training mode, reverse and low voltage
    detection for usage with TWO and THREE LiPo loads
Motor: Traxxas Velineon 380 brushless, 8 turn 4000kV with Neodymium
    magnets, sintered rotor and high RPM ball bearings, 3.5mm gold
    plated bullet connectors
Stimulate Equipment: 45 tooth
Pinion Equipment: 16 tooth 48 pitch
Battery: One Traxxas Power Cell 1200mAh 6-cell NiMH w/high existing
    adapter, and iD Auto Battery Identification that permits Traxxas
    iD geared up chargers to instantly set and optimize charge
    settings
    double NiMH battery capability (extra battery and series adapter not
    consisted of and should be purchased individually)
    Vehicle is also compatible with one TWO or THREE LiPo pack (not
    consisted of) LiPo mode on ESC should be picked.
    **NOTE the ESC and motor CANNOT deal with double LiPos, if utilizing double
    batteries, both should be NiMH.**
Battery Charger: 2 amp DC powered quick charger
Body: Painted and trimmed with applied decals
Bumpers: Front and rear, composite building
Shocks: GTR oil filled
Suspension: Revo-spec rocker actuated long travel inboard type with
    telescoping universal joint shafts
Transmission: Single speed ball bearing geared up with adjustable
    slipper clutch
Differentials: Sealed silicone filled planetary steel bevel gears
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when seen from front or behind automobile
Tires: Multi terrain, with big angular lugs and foam inserts
Wheels: 2.2" (56mm) size Geode, chrome finish with painted
    beadlock design rims, standard size 12mm hex
Steering: Bellcrank with spring packed servo protection

CONSISTS OF:
RTR Traxxas Top VXL Beast Truck with TQ 2.4GHz 2-ch radio, TSM,
    micro steering servo, ESC, painted body, 6-cell battery,
    charger, brushless motor and user's manual

NEEDS:
AA Cells: Four for transmitter

SPECS:
Vehicle-
Length: 12.6" (320mm)
Height: 7.48" (190mm)
Front Track: 10.43" (265mm)
Rear Track: 10.63" (270mm) range in between outer edges of wheels
    side-to-side
Weight: 44oz (1.24kg)
Wheelbase: 8.425" (214mm)
Ground Clearance: 2.75" (70mm)
Internal Equipment Ratio: 5.04:1 (reversed input: 9.72:1)
Overall Drive Ratio: 15.75 (stock, out of box)
    Body-
Length: 11.4" (291mm)
Width: 5" (127mm)
Height: 3.6" (92mm) measured at light bar

COMMENTS:
If wanting to upgrade to a battery with a slightly greater mAh rating,
    the DuraTrax 1600mAh NiMH 7.2V 6-Cell Battery (DTXC2192) is an
    ideal choice.

The ball bearings in the Traxxas Top VXL are rubber sealed.
Following are the stock numbers for the replacement bearings from
    Traxxas and non-rubber sealed alternatives from Duratrax;
    Qty. Size Place Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Back Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Equipment 1 TRAC7019 DTXC1511

    Available in the following body colors;
Blue, TRAD66BB Red, TRAD66RR
White, TRAD66WW Yellow, TRAD66YY

Trends
#1/16SummitVXL
#Traxxas1/16SummitVXL

X-Plosion Parts Finder Click Below For Parts Explosions For 1/16 Summit VXL

Frequently Bought Together

Traxxas 1/16 Summit VXL TQ 2.4GHz TSM
+
Traxxas 1/16 E-Revo Wheelie Bar
This Item: Traxxas 1/16 Summit VXL TQ 2.4GHz TSM
$369.95
Traxxas 1/16 E-Revo Wheelie Bar
$15.49

Total Price: $385.44

Add Both To Cart

Frequently Purchased 1/16 Summit VXL Parts

Visual Parts Finder