Traxxas 1/16 E-Revo Wheelie Bar

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo.

FUNCTIONS:
Nylon construction
Black in color

INCLUDES:
One Wheelie Bar
One 2x14mm Cap Head Screws
Three 2x8mm Cap Head Screws
Instruction Sheet

REQUIRES:
Setup at back of chassis

Want an additional excellent item to enhance the above mentioned item?



This is the Duratrax 19-in-1 Tool Set for Traxxas Vehicles.

FEATURES:
All tools needed for regular upkeep on over a lots of the
    most popular Traxxas automobiles as well as numerous other RC automobiles
Nut drivers, hex drivers, screwdrivers and turnbuckle wrench in
    multiple sizes
Ergonomic ratchet handle
Adjustable bit length
Black nylon zippered carrying case with Duratrax logo design

INCLUDES:
4, 5, 5.5, 7 and 8mm Nut Drivers
1.5, 2, 2.5, 3, 3.5, and 4mm Hex Drivers
#0, #00, #1 Phillips Screwdrivers
2, 3, and 4mm Slotted Head Screwrivers
5, 8mm Turnbuckle Wrench
Ratchet Handle

Several others have acquired this item in addition to the item that you are presently reading about.

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Metal Building and construction
Silver in Color
Bent for Easy Elimination

INCLUDES:
10 Bent Silver Metal Body Clips

REQUIRES:
Assembly onto Automobile

Here is an additional item that praises the item being discussed.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Equipment for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction

INCLUDES:
One Diff Ring Equipment
One Pinion Equipment

REQUIRES:
Setup on the automobile

Often acquired with the item that you are presently reading about.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/16 scale vehicle applications
Prewired with Traxxas high current connector

INCLUDES:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Adapter

REQUIRES:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Rated Capability: 1300mAh
Discharge Score: 25C constant
Dimensions: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Adapter: ElectriFly
Watt Hours: 14Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER allow to Discharge listed below 2.5V per cell
NEVER take apart or modify pack electrical wiring in any method or puncture cells
NEVER place on flammable products or leave unattended during
    charging
ALWAYS Charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm