RPM Sealed Gear Cover, For Traxxas E-Rustler/Stampede 2Wd/Bandit/Sla

This is the optional RPM Gear Cover for the Traxxas Electric Rustler,
Stampede, Bandit, and Slash.

FEATURES:
Nylon building and construction
Blue in color
Fits XL-5 and VXL Versions
Optimum Spur Gear (87 Tooth)

INCLUDES:
One Blue Sealed Gear Cover

REQUIRES:
Installation on the above discussed cars

SPECS:
Length: 79mm (3.11")
Width: 60mm (2.36")
Height: 35mm (1.38")

COMMENTS:
Also readily available in Black (RPMC8029)

This item praises the above gone over item.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural refined color

INCLUDES:
Twelve Body Clips

SPECS:
Length: 26mm

Want another wonderful item to compliment the above stated item?

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

This item praises the main item here.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Tough nylon enhanced plastic building and construction
Utilizes all stock hardware (for installing shocks and so on)

INCLUDES:
One back shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm

Want another wonderful item to compliment the above stated item?

Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Rear Bumper Mount from RPM for usage on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building and construction
Blue in color

INCLUDES:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
4 3x12mm Screws
One 3x16mm Screw
Three 3x25mm Screws
One 3mm Locknut
2 RPM Decals

REQUIRES:
Installation on the vehicle
2mm Allen Driver for Installation

Often bought with the item that you are currently reading about.

Rear Bumper, For Traxxas Slash 2Wd, Blue

This is the RPM Rear Bumper for usage on the Traxxas Slash.

FEATURES:
Nylon building and construction
Blue in color

INCLUDES:
One Left Side Bumper Support
One Right Side Bumper Support
One Rear Bumper
8 3x16mm Buttonhead Screws

REQUIRES:
Installation on the vehicle

COMMENTS:
Also readily available in:
Black (RPMC0080)
Chrome (RPMC0081)

This is a amazing addition to the item currently being gone over.

Blue Gearbox Housing And Rear Mounts For Traxxas 2Wd Vehicles

This is the optional RPM Hybrid Gearbox Real estate in Blue
for the Traxxas 1/10 scale 2WD Slash, Stampede, E-Rustler and Bandit.

FEATURES:
0.12" (3mm) thick 6061 T6 aluminum motor plate offers strength to
    lock in gear mesh, and much better heat dissipation than stock plastic
    motor plate
Motor plate is different from rear bumper mounts eliminating damage to
    the plate in case of a rear collision
Molded nylon gearbox housing with stock bumper installing holes
Different housing and rear mounts enable transmission maintenance
    without affecting suspension settings
0° and 3° molded rear mounts offer tighter tolerances and less slop
    than machined components for much better camber and toe angle retention

INCLUDES:
2 Gearbox Real estates, Motor Plate, 2 0° and 2 3° Rear Installs and
    Instructions