RPM Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Blue Wide Front Bumper
for the Traxxas Rustler, Stampede and Bandit.
The Bumper goes on the Front of the Car and Protects the Chassis.

FEATURES:
Long lasting plastic building
Fits both nitro and electric versions of the Rustler and Stampede

SUCHES AS:
One Bumper
One Group RPM Decal

REQUIRES:
Installation onto the Traxxas Rustler, Stampede or Bandit

SPECS:
Length: 2-3/4" (70mm)
Width: 6-1/4" (159mm)

Lots of others have actually acquired this product in addition to the product that you are presently reviewing.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, blue in color
Installs at rear of chassis to prevent vehicle from turning over
    throughout wheelies

SUCHES AS:
Assembled optional Wheelie Bar with mounting guidelines and
    hardware

REQUIRES:
Attaching to rear of chassis

Want an additional terrific product to enhance the above pointed out product?

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Flexible plastic building, green in color

SUCHES AS:
RPM Wide Front Bumper in Green

SPECS:
Length: 2.7" (70mm) measured at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

Lots of others have actually acquired this product in addition to the product that you are presently reviewing.

Large Servo Saver

This is a big servo saver that can be used in Traxxas automobiles or any car that
requires a big design servo saver.
FEATURES:
Tough white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that allow you to install the saver
on most popular servos suching as: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise included is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for mounting the steering linkages.

Right here is a terrific product that numerous others have actually purchased the very same time.

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead used in numerous Traxxas vehicles.
The front suspension arm hinge pins travel through this piece.

FEATURES:
Gray nylon building

SUCHES AS:
One front bulkhead

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is used on the following cars:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

The listed below product also pairs really well with the product being gone over.

Wheelie Bar Assembled-Green Stampede/Rustler/Bandit

This is an optional Wheelie Bar in Green for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, neon green in color
Installs at rear of chassis to prevent vehicle from turning over
    throughout wheelies

SUCHES AS:
Assembled optional Wheelie Bar with mounting guidelines and
    hardware

REQUIRES:
Attaching to rear of chassis

This product compliments the above gone over product.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is what the
steering knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and left to guarantee correct installation

SUCHES AS:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and steering knuckles