ST Racing Concepts Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Ideas Sleek Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel building and construction

INCLUDES:
Left and Right King Pins for front suspension

Regularly acquired with the product that you are presently reading about.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is what the
steering knuckles connect to.

FEATURES:
Nylon building and construction, black in color
Stamped right and left to guarantee correct setup

INCLUDES:
2|2} RPM 30° Front Caster Blocks

REQUIRES:
Assembly between A-arms and steering knuckles

Want an additional great product to compliment the above pointed out product?

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2|2} Front bearing (center) carriers
2|2} RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Want an additional great product to compliment the above pointed out product?



Right here is a great product that numerous others have actually bought at the exact same time.

Aluminum Caster Blocks, Red, For Traxxas Slash / Stampede / Rust

Right here is a great product that numerous others have actually bought at the exact same time.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Back Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2|2} rear bearing (center) carriers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at best point: 15.4mm (0.61")

This product is regularly acquired with the above pointed out product.



This is the ST Racing Solidified Sleek Steel Lock-nut Style Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins revoking the A-arms? If you've
been running your Traxxas vehicle enough time, you more than likely have
already experienced this issue. ST Racing Ideas Heat Treated
Sleek Steel Lock-Nut Style Hinge-Pin Kit will resolve this issue
once and for all. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat treated for boost in durability, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts

The below product also pairs really well with the product being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)