RPM Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles suit these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
Two rear bearing (hub) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at widest point: 15.4mm (0.61")

You will certainly like this thing if you have the thing just above mentioned.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
Two Front bearing (hub) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Many others have gotten this thing along with the thing that you are currently reading about.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is what the
guiding knuckles attach to.

FEATURES:
Nylon building, black in color
Stamped right and delegated insure right setup

INCLUDES:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and guiding knuckles

Below is a great thing that numerous others have bought at the same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Below is an additional thing that compliments the thing being gone over.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a set of ST Racing Principles Sleek Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat dealt with and polished steel building

INCLUDES:
Left and Right King Pins for front suspension

Below is an additional thing that compliments the thing being gone over.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building, black in color
Direct fit hop-up needs no model modification for setup

INCLUDES:
Two Front A-Arms

NEEDS:
Setup following the model handbook

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at widest

REMARKS:
For the blue version of this part order RPMC8246

This thing compliments the above gone over thing.

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Heavy Duty Rear A-Arms for the
2WD Traxxas Slash Short Course Racing Truck.

FEATURES:
Nylon building
Black in color
Very durable

INCLUDES:
Two Heavy Duty Rear A-Arms

NEEDS:
Setup on the vehicle

SPECIFICATIONS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

REMARKS:
Likewise offered in Blue RPMC8472

Many others have gotten this thing along with the thing that you are currently reading about.

Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Outlaw & Nitro Stampede.

FEATURES:
Plastic building
Black in color

INCLUDES:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Outlaw
    and Nitro Stampede

NEEDS:
Setup on the vehicle

SPECIFICATIONS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Density: .27" (7mm)