RPM Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
Two Front/Rear A-Arms

NEEDS:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

COMMENTS:
Also offered in Blue (RPMC0705)

Here is a great product that several others have purchased the exact same time.

Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, coated
Anodized black with white springs
Totally assembled

INCLUDES:
4 fully assembled shocks with white springs
Installing hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and putting together onto the design

This product is often bought with the above discussed product.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on automobile

This product is often bought with the above discussed product.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

INCLUDES:
Front driveshaft assembly
Screw pin

NEEDS:
Installation on automobile

This product compliments the above discussed product.

3 X 15Mm Button Hex Screw (6)

This is a bundle of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo monster truck, can likewise be utilized in any
    application where a 3x15mm button head screw is required

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

You will like this product if you have the product earlier pointed out.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Durable steel building
Silver in color

INCLUDES:
4 51.5mm pins
4 30mm pins

NEEDS:
Installation on the Slash 4x4

Get this product to enhance the one you are reading about.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Blue in color
Plastic constrution

INCLUDES:
(2) Front/Rear A-Arms

NEEDS:
Installation on front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

COMMENTS:
Also offered in Black (RPMC0702)

This product compliments the main item below.



Racers Edge 7.4V 25C 5000 Race Battery hardwired W/TRX HC Plug. Racers Edge battery is lighter than traditional Ni-Cd or Ni-Mh batteries while providing improved performance and run times. It utilizes the same balancing connection as Align or Electrifly battery chargers. Make certain to use a voltage cut off if your speed control doesn't come geared up with one. ONLY USAGE A BATTERY CHARGER PARTICULARLY FOR Li-Poly cells!!!

Regularly bought with the product that you are presently reading about.

Front Bulkhead For Slash 4X4 Lcg And Rustler 4X4, Black

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Suitable with the LGC chassis just**
**will not work with the conventional chassis version of the Slash 4x4.**

FUNCTIONS:
Two-piece design allows front end of automobile to be gotten rid of without
    having to remove the bellcranks
Side dirt guards mix with the chassis and assistance secure the
    steering servo and bellcrank area from dirt
Constructed of engineering grade nylons, black in color

INCLUDES:
Two-Piece Front Bulkhead with Installing Hardware and Guideline Sheet