RPM Blue Esc Cage For Castle Sidewinder 3 & Sidewinder Sct Escs

This is the RPM ESC Cage for Castle Sidewinder 3
and Sidewinder SCT Electronic Speed Controls.

FEATURES:
Constructed of engineering grade nylon, blue in color
Fits the following Castle Creations ESCs;
    010-0115-00, 010-0115-01, 010-0115-02, 010-0115-03, 010-0115-04
    010-0123-00
Enables ESC to be run with or without a fan
Fastens to chassis with two screws, entire assembly can be moved
    from one car to the next in about a minute
Separate switch mount bolts to cage, or may be installed anywhere by
    two 2mm holes
Fits the following Traxxas cars;
    Slash 2WD
    Slash 2wd LCG
    Slash 4×4,
    Slash 4×4 LCG
    Stampede 4x4
    Rally
Fits the following Traxxas cars when the Traxxas #3725 Installing
    Plate is used;
    Rustler XL-5
    Stampede XL-5
    Bandit XL-5

INCLUDES:
Unassembled ESC Cage with Hardware and Guideline Sheet
Separate On/Off Switch Mount

Lots of others have gotten this product together with the product that you are presently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in heavier
    cars such as E-Revos or E-Maxx class cars)
USB shows capability through Castle Link USB adapter (not included,
    order CSEM6300)
Water resistant for use in nearly every environment (not intended for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces lots of stock brushed motors
4 magnet, four pole rotor for greater torque
1.4" size slotted stator
Easily removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Switch, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery adapter of modeler's option

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)

Get this product to enhance the one you are reading around.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Only (No Wires).

FUNCTIONS:
Shrouded wire connections (no shrink tube required)
Wide area, gold-plated terminals
Reverse polarity protection makes it impossible to link backwards
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protect, positive locking spring loaded terminals for consistent
    contact
Several locking barbs keep terminals protect

INCLUDES:
One black female plastic adapter
One black male plastic adapter
2 sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins