RPM Blue Esc Cage For Castle Sidewinder 3 & Sidewinder Sct Escs

This is the RPM ESC Cage for Castle Sidewinder 3
and Sidewinder SCT Electronic Speed Controls.

FEATURES:
Constructed of engineering grade nylon, blue in color
Fits the following Castle Creations ESCs;
    010-0115-00, 010-0115-01, 010-0115-02, 010-0115-03, 010-0115-04
    010-0123-00
Enables ESC to be kept up or without a fan
Fastens to chassis with two screws, whole assembly can be moved
    from one vehicle to the next in about a minute
Separate switch install bolts to cage, or might be installed anywhere by
    two 2mm holes
Fits the following Traxxas automobiles;
    Slash 2WD
    Slash 2wd LCG
    Slash 4×4,
    Slash 4×4 LCG
    Stampede 4x4
    Rally
Fits the following Traxxas automobiles when the Traxxas #3725 Installing
    Plate is used;
    Rustler XL-5
    Stampede XL-5
    Bandit XL-5

CONSISTS OF:
Unassembled ESC Cage with Hardware and Guideline Sheet
Separate On/Off Switch Mount

Numerous others have bought this thing along with the thing that you are presently reading about.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programming ability by means of Castle Link USB adapter (not suched as,
    order CSEM6300)
Water resistant for use in almost every environment (not intended for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces lots of stock brushed motors
Four magnet, 4 pole rotor for higher torque
1.4" diameter slotted stator
Removable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Switch, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery connector of modeler's choice

SPECS:
ESC;
Input Voltage: TWO LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)

Get this thing to improve the one you are reading about.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide area, gold-plated terminals
Reverse polarity defense makes it difficult to link in reverse
Textured surface for simple gripping
Compatible with high-current 12-gauge wire
Protect, favorable locking spring crammed terminals for constant
    contact
Several locking barbs keep terminals protect

CONSISTS OF:
One black female plastic connector
One black male plastic connector
Two sets of gold metal pins
Guideline sheet

NEEDS:
Soldering wires to the metal pins