Hyperion Hyperion Light Y connector 7

Universal, High-Quality Servo LIGHT WIRE Y-CONNECTOR with Gold Pins-Sockets-180mm
These are the brand-new "Light" cable televisions for little designs, where conserving every gram counts. Hyperion Servo Connectors are made in Korea to the greatest standards, and contacts are plated with quality gold. Your design depending upon those servos, so get excellent cable televisions! They are "universal", indicating that any Male servo port will fit the Futaba-style Female on the Hyperion cable television, and any Female servo port will fit the JR-type Male end. Wires are 0.15qmm (~25 AWG) 30 hair

When describing Male and Female, we are talking about the Plastic Covers - not the metal adapters inside!

Here is a wonderful product that several others have purchased the same time.



Numerous others have gotten this product along with the product that you are currently reading about.

Mini-Ny Steel Pushrod Assembly

This is a Light-weight pushrod assembly perfect for 1/2A applications. The
assembly includes a plastic external tube, steel pushrods, plastic clevis'
and spring threads.

Includes: 2- steel pushrods
2- plastic pushrod covers
4- little plastic clevis'
4- steel spring threads (these are soldered to the wire as threads)

Requirements: Rod length 19" rod diameter 1/32"
Plastic tube 16" tube inner dia. 1/16" external dia.1/8"

Here is a wonderful product that several others have purchased the same time.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon construction

CONSISTS OF:
Two control horns w/4 changing holes and 2 mounting holes
(3/4" long [high])
Two mounting plates w/2 mounting holes (3/8"x3/8")
4 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "consists of" above

You will certainly love this thing if you have the thing previously mentioned.

9x6 Thin Electric Prop

This is one R/C Airplane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are produced utilizing a pultrusion procedure. This approach
    ca{uses|triggers} the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, enabling a higher fiber (60%) to resin (nylon binder)
    density. Supplying substantially higher strength and stiffness than
    glass filled nylon.
The added stiffness is helpful to control of vibration
    resonance response.
The higher strength enables the use of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

NEEDS:
ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Diameter: 9"
Prop Pitch: 6
Hub Thickness: 0.40"
Hub Diameter: 0.79"
Weight: 0.035lbs
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with radiance engines.

You will certainly love this thing if you have the thing previously mentioned.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design removes the possiblility of reverse polarity
connections
Supplies a safe and secure connection for battery and motor connections

CONSISTS OF:
Two 2-Pin Male Ultra Plug
4 short pieces of Black diminish tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

COMMENTS:
For Female end use WSDM1303
For both Male and Female use WSDM3001