Dubro Mini-Ny Steel Pushrod Assembly

This is a Lightweight pushrod assembly suitable for 1/2A applications. The
assembly includes a plastic external tube, steel pushrods, plastic clevis'
and spring threads.

Includes: 2- steel pushrods
2- plastic pushrod covers
4- small plastic clevis'
4- steel spring threads (these are soldered to the wire as threads)

Specs: Rod length 19" rod diameter 1/32"
Plastic tube 16" tube inner dia. 1/16" external dia.1/8"

Want another fantastic thing to compliment the above pointed out thing?

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon construction

INCLUDES:
Two control horns w/4 changing holes and 2 mounting holes
(3/4" long [tall])
Two mounting plates w/2 mounting holes (3/8"x3/8")
4 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "includes" above

This thing praises the above reviewed thing.

8x3.8 Slow Flyer Propeller

This is a 8x3.8 Slo-Flyer "tractor" (not a "pusher") aircraft propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon construction decreases rotating mass for
    greater output and longer life.
Reinforcing carbon fibers help keep real, consistent pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of small shaft locating rings
One locating ring instruction sheet

REQUIRES:
ALL props need balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 8"
Pitch: 3.8

REMARKS:
Slo-Flyer props are Not created for Radiance engines

Here is another thing that praises the thing being reviewed.

Hs-55 Sub Micro Servo, .14Sec/18Oz @ 6.0V

    This is the Hitec HS-55 Sub Micro (Feather) Servo with a
Futaba J, Hitec S, JR, Airtronics Z-type Connector.

FEATURES:
Really slim case and light-weight for mounting in small aircrafts,
    electrics or gliders, where really high speed and excellent torque are
    critical.
One of the slimmest micro servos available.
High-strength resin gear train offers reliable operation.

INCLUDES:
One HS-55 Servo w/pre-installed small X-shaped servo horn and screw
One really small straight servo horn
One M1.7x3 servo horn screw
One small straight servo horn
Two M1.7x7 servo mounting screws

at 4.8V
SPECIFICATIONS:
Speed: 0.17 sec at 60°
Output Torque: 15.27 oz-in (1.1 kg-cm)
Weight: 0.27oz (7.8g)
Length: 0.89" (22.8mm)
Width: 0.45" (11.6mm)
Height: 0.94" (24mm)

This thing praises the main item right here.

Hyperion Light Y connector 7

Universal, High-Quality Servo LIGHT WIRE Y-CONNECTOR with Gold Pins-Sockets-180mm
These are the brand-new "Light" cables for small models, where conserving every gram counts. Hyperion Servo Connectors are made in Korea to the highest standards, and contacts are plated with quality gold. Your design depending on those servos, so get excellent cables! They are "universal", indicating that any Male servo adapter will fit the Futaba-style Female on the Hyperion cable television, and any Female servo adapter will fit the JR-type Male end. Wires are 0.15qmm (~25 AWG) 30 strand

When referring to Male and Female, we are talking about the Plastic Covers - not the metal ports inside!