HPI Belt, Rear, Sprint

Model: HPI 87007
Dist. #: HPIC8707 SKU: HPI87007

Be the first to review this product. (Write Review)

Out of stock

Price:

$9.49

This item will earn you 9 reward point(s).
9 points = $0.18 off your next order. Learn More

Updated on Apr 27, 2025 02:16:00 PM

Urethane Belt S3M 174 UG 4mm Sprint RTR...

This is the Stock Replacement Back Belt for the HPI Sprint RTR.
This connects to the rear differential.

FEATURES:
Urethane building and construction

CONSISTS OF:
One back belt

REQUIRES:
Setup onto Sprint RTR.

SPECS:
Length: 174mm (6.85")

COMMENTS:
This belt is not to be used with the GTI.

This product is regularly gotten with the above mentioned product.

Pulley Set, 15 Tooth, (2Pcs), Sprint

This is a Set of Stock Replacement 15 Tooth Pulleys for the HPI Sprint.
These pulley-blocks turn under the drive belt.

FEATURES:
Black plastic building and construction

CONSISTS OF:
Two pulley-blocks
Two wheel ends
Two pins

REQUIRES:
Absolutely nothing. These are direct replacement parts.

SPECS:
Sheave length: 14mm (0.55")
Sheave tooth diameter: 13.5mm (0.54")
Pin length: 8mm (0.32")
Pin diameter: 1.6mm (0.06")

Many others have gotten this product together with the product that you are currently reviewing.

Belt, Front, Sprint

This is the Stock Replacement Main Belt for the HPI Sprint RTR.

FEATURES:
Urethane building and construction

CONSISTS OF:
One main belt

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 507mm (20.0")

This is a great addition to the product currently being discussed.

Gear Differential Case, (1Pc), Sprint

This is the Stock Replacement Gear Diff Case for the HPI Sprint RTR.
This lies in the front and back of the vehicle.

FEATURES:
Black plastic building and construction

CONSISTS OF:
One gear diff case
Two 5x8mm brass bushings
4 2x14mm round head self-tapping screws

REQUIRES:
The remainder of the diff components.

SPECS:
Case length: 39mm (1.54")
Case tooth diameter: 29.7mm (1.17")

COMMENTS:
For optional ball bearings, use DTXC1523.

This is a great addition to the product currently being discussed.

Front Belt Tensioner, Sprint 2

This is the Stock Replacement Front Belt Tensioner for the HPI Sprint RTR.
This lies at the front of the main belt.

FEATURES:
Plastic and steel building and construction

CONSISTS OF:
One belt tensioner install
One belt tensioner shaft
Two brass bushings (5x8mm)
One 5mm e-clip
One 5x10mm washer
One 3x10mm roundhead device screw
One 3x8mm roundhead device screw

REQUIRES:
Setup onto vehicle.

COMMENTS:
For optional ball bearings, use DTXC1523.