Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24

9.5g Brass KMC Machete Wheel Weights, for Axial SCX24

Hot Racing front or rear wheel weights for the stock 1.0in KMC Machete wheels on the Axial SCX24.

Features:

CNC machined strong brass billet

9g each fitted to the wheels to lower the cars center of mass, increase its stability, improve climbing, minimize the opportunity for turning backwards, and make for a total more capable spider|spider}

Friction fit to within KMC Machete wheels. Some CA glue can be used to secure setup

Can be used either in front of back, however if you're just getting one set we recommend utilizing them in the front

Specs:

Center: 12mm hex

For : AXI31615

Diameter of external : 21.4mm

Diameter of inside : 12mm

Weight: 9.5g/ea

Width: 8mm

Often bought with the item that you are currently checking out.

9G Brass Differential Cover, For Axial Scx24

9g Brass Differential Cover, for Axial SCX24

Hot Racing heavy brass cover for SCX24 Worm equipment Axles Adds 9g of weight to the axle in a low and central place to lower the vehicle's center of gravity, increase its stability, and make it an in general more capable crawler.

Features:

CNC machined strong brass billet

Adds 9g of low and central weight to lower and centralize the vehicle's center of mass, increase its stability, and make it an

Overall more capable crawler

mm increased thickness over stock cover for additional toughness and weight

Fits either the front or back

Specs:

Width:14.33 mm

Height:24 mm

Weight: 9g

Want an additional terrific item to match the above mentioned item?

Brass Front Steering Knuckle, For Axial Scx24

Brass Front Steering Knuckle, for Axial SCX24

Hot Racing heavy duty brass SCX24 Worm equipment Axles steering knuckles (steering blocks) for the Axial SCX24 axles. Include weight to your spider where it requires it - down low.

Features:

CNC machined strong brass

Heavy to include weight to vehicle for higher stability and lower CG

Cutouts on knuckle for access to external bearing race for simple bearing removal

Direct replacement for factory plastic steering knuckles

Want an additional terrific item to match the above mentioned item?

Brass Stock Wheels Hub, 7Mm Hex, For Scx24

Brass Stock Wheels Center, 7mm Hex, for SCX24

Features:

CNC Machined Solid Brass construction.

You Will Receive:

Four Hex Wheel Hubs

Four 2 x 6mm Axle Pins

Requirements:

Assembly onto SCX24.

Specs:

Hex: 7mm

Inner diameter: 4mm

Right here is a terrific item that lots of others have purchased the very same time.

Aluminum Front Bumper W/Fairlead And Light Buckets, For Axial Sc

Aluminum Front Bumper w/Fairlead and Light Pails, for Axial SCX24

Hot Racing CNC machined aluminum front bumper with 3mm LED light buckets, winch fairlead for usage with Axial SCX 24.

Features:

Billet CNC machined aluminum

Anodized a stylish flat black

Integrated brush guards

Light buckets for 3mm LED lights

Specs:

Width: 58mm

Height: 8mm

Right here is a terrific item that lots of others have purchased the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Secret Features:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Practical narrow-stance rock spider body in olive green or red
• Molded roll cage with sensible light bar
• Practical motorist figure and lots of other scale details
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Path Grappler M/T tires (S30 substance, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts enable maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and durability
• Rugged steel C-channel frame rails with bracing keep everything stiff and lined up
• Front and rear axles include a two-piece, molded plastic strong axle design
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and resilient plastic suspension links deliver proven Axial crawling efficiency
• Front and rear differentials each home a worm equipment setup to power the axles and develop higher ground clearance. Worm equipment drive also provides a low equipment ratio to minimize torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to take along on your hiking, camping, and other outdoor and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to deal with hard climbs up and rough trails. Like the bigger SCX10™ chassis, this smaller sized variation uses a lot of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pushing onward and upward.

For the most dependable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and resilient plastic suspension links provides Axial-worthy crawling efficiency even at this little scale. The worm equipment drive setup permits a high ground clearance plus a low equipment ratio that reduces torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt displays competence and charm on the trails. Take a look at that Deadbolt body — with its narrow position, bulging hood, sensible motorist figure, and molded roll cage with sensible light bar. The realism continues right down to the ground, where you’ll discover licensed KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding much more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: put together and finished vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (set up)
    (1) Dynamite® 88T brushed electric motor (set up)
    (1) Axial AS-1 steering servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and strong steel c-channel frame rails with bracing to keep everything intact and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the correct amount of torque to help rise high climbs up. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the equipments.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and develop higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones supply strength and durability to keep things running throughout hard climbs up and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the mix of coilover shocks with simulated reservoirs and resilient plastic suspension links provides the crawling efficiency you have actually understood and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a two piece, molded plastic strong axle design. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two intense LED lights are included and are installed in the front bumper. An extra LED light port on the ESC allows you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the back which is optimized to minimize axle steer and torque twist. We have actually also included extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are famous in the off-road world. They are molded in black and function sensational scale details, despite the little scale.
The formally accredited Nitto Path Grappler M/T Tires provide a fantastic blend of off-road efficiency while still keeping excellent composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system uses simple access to on-board components. You can rapidly reach the battery and chassis by eliminating just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller sized in size does not indicate the functions require to do the same. No bushings discovered here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the whole vehicle.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also offering protection for the servo equipments in the event of a bind or impact.
 

Specs

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Battery charger: USB LiPo battery charger (included)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) diameter
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No